Linksys PAP2-VU Enter the IP, Address Address using, 140, Format Check Firmware 150, Version

Page 18

Phone Adapter with 2 Ports for Voice-over-IP

Interactive Voice Response Menu

Action	Command	Choices	Description
	(press these
	keys on the
	telephone)

Set Static Gateway IP	131	Enter the IP	To set a static gateway IP address, the
Address		address using	DHCP feature must be disabled. If the
		numbers on the	DHCP feature is enabled, then you will
		telephone keypad.	hear, “Invalid Option,” if you try to set
		Use the * (star) key	a static gateway IP address.
		when entering a
		decimal point.

Check MAC Address	140		You will hear the MAC address of the
			Phone Adapter in hexadecimal string
			format.

Check Firmware	150		You will hear the version number of
Version			the firmware currently installed on the
			Phone Adapter.

Manual Reboot	732668		After you hear, “Option successful,”
			hang up the phone. The Phone
			Adapter will automatically reboot.

Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu			13

Using the Interactive Voice Response Menu

Image 18

Contents Phone Adapter Division of Cisco Systems, IncPage How to Use this Guide Copyright and TrademarksTable of Contents Back Panel Front PanelIntroduction WelcomeWhat’s in this Guide? What’s in this Guide? Getting to Know the Phone Adapter Back Panel PortsFront Panel Phone Adapter’s LEDs are located on the front panelPhone is being used or an incoming call has been detected Overview Connecting the Phone AdapterInstructions for Connecting the Phone Adapter InternetConnect the Telephone Cable Remove the plate from the Phone Adapter’s bottom panel Placement OptionsStand Option Phone Adapter’s Interactive Voice Response MenuWall-Mount Option Measurement between Wall-Mount SlotsUsing the Phone Adapter’s Interactive Voice Response Menu Accessing the Interactive Voice Response MenuUsing the Interactive Voice Response Menu Not press any other keys until you Use this command to enter Response MenuInteractive Voice Response Menu Key or hang up to exitEnter 0 to disable Has been enabled or disabled. If101 Enter 1 to enable Check Dhcp 100Subnet Mask Mask using Address usingStatic IP address When entering a Decimal point Network mask When entering a Decimal pointPhone Adapter Manual Reboot 732668 Address Address usingStatic gateway IP address When entering a Decimal point 131 Enter the IPConfiguring the Settings for Your Internet Phone Service Appendix a Troubleshooting Common Problems and SolutionsAppendix a Troubleshooting IP address Phone Adapter Internet phone 53 to Application Start and End Protocol IP Address EnableInternet phone 5060 to IP address Phone Adapter Internet phone 69 toPhone Adapter with 2 Ports for Voice-over-IP Application Start and End Protocol IP Address Enable Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Application Start and End Protocol IP Address Enable Frequently Asked Questions Pick up the phone and dial as you normally wouldCan I make calls while I’m browsing the Internet? Appendix B Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix B Windows Help Appendix C Glossary Appendix C Glossary Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Appendix D Specifications Dimensions Storage HumidityMm x 101 mm x 15 mm Appendix E Warranty Information Limited WarrantyAppendix E Warranty Information Appendix F Regulatory Information FCC StatementAppendix F Regulatory Information Appendix G Contact Information Appendix G Contact Information