Allied Telesis AT-iMG646PX-ON, AT-EN646 manual LEDs, Led

AT-iMG646xx Series Intelligent Multiservice Gateway and AT-EN646 Enclosure Installation Guide

LEDs

The AT-iMG646xx series intelligent Multiservice Gateway has four LEDs, as shown in Figure 2 and three of which are described in Table 2.

		880
		Figure 2. Gateway LEDs
	Table 2. PWR, SYST, and LAN LEDs
LED	State	Description
PWR	On	The gateway is receiving power and the voltage
		is within an acceptable range.
	Off	The unit is not receiving power.
SYST	On	The unit is starting up or is malfunctioning.
	Off	The unit is working normally.
	Flashing	The gateway is downloading software and writing
		it to flash memory. Do not reboot or remove
		power from the unit when it is in this state.
WAN	On	A WAN link has been established.
	Off	A WAN link has not been established.
	Flashing	The WAN link is active.
VOIP	On	One or all of the VoIP lines are in use.
	Off	None of the VoIP lines are in use.
	Flashing	The VoIP network is operating.

21