Allied Telesis AT-EN646, AT-iMG646PX-ON manual Installing the Gateway Indoors

Chapter 5: Installing the Gateway Indoors

Reviewing Safety Precautions

Please review the following safety precautions before you begin to install the gateway.

Note

The  indicates that a translation of the safety statement is available in a PDF document titled “Translated Safety Statements” (613-000405) on the Allied Telesis website at www.alliedtelesis.com.

Warning: Class 1 Laser product.  L1

Warning: To prevent electric shock, do not remove the cover. No user-serviceable parts inside. This unit contains hazardous voltages and should only be opened by a trained and qualified technician. To avoid the possibility of electric shock, disconnect electric power to the product before connecting or disconnecting the LAN cables.  E1

Warning: Do not work on equipment or cables during periods of lightning activity.  E2

Warning: Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts.  E4

Pluggable Equipment. The socket outlet shall be installed near the equipment and shall be easily accessible.  E5

Warning: Operating Temperature. This product is designed for a an operating temperature range of -40 to +60 degrees C.

All Countries: Install product in accordance with local and

National Electrical Codes.  E8

Warning: Only trained and qualified personnel are allowed to install or to replace this equipment.  E14

70 Section II: Indoor Installation