Installing the Grounding Plate
To install the grounding plate, perform the following procedure:
1.Open the outer and inner doors of the enclosure.
2.Remove the grounding plate (shown in Figure 5) and the
Gateway Mounting Post
Ground Wire Post 
Aramid Yarn and Tracer Wire Post
| 841 |
Drop Cable Clamp | Strength Member Clamp |
|
Figure 5. Grounding Plate
3.Align the notch in the grounding plate with the vertical support, and the hole in the grounding plate with the hole in the back of the enclosure, as shown in Figure 6.
Mounting Hole | Vertical Support |
| |
| 842 |
Figure 6. Aligning the Grounding Plate
4.Use the self-tapping screw to secure the grounding plate to the enclosure through the mounting hole in the grounding plate.
Section I: Outdoor Installation | 35 |