Allied Telesis AT-EN646, AT-iMG646PX-ON manual Required Tools and Supplies

Chapter 4: Installing the Gateway Outdoors

Required Tools and Supplies

Tools

Additional Supplies

The following tools and supplies are required to install the gateway:

Have the following tools on hand before you install the enclosure or gateway:

ˆFlat head and #2 Phillips screwdrivers

ˆWire cutters

ˆCrimping tool

You may also need the following supplies:

ˆSilicone sealant

ˆElectrical tape

ˆTwo UV-rated wire ties

ˆConsole cable (AT-RGCONSOLECABLE)

ˆPower cable (AT-RG013-00)

ˆPower supply (AT-iMG005G)

ˆFiber cleaning materials (see Appendix B, “Cleaning Fiber Optic Connectors” on page 91)

You will need the following items to create a ground wire for the DC terminal block:

ˆOne piece of #18 AWG stranded wire, 5-1/2-6 inches (140mm- 150mm) long, green with a yellow stripe

ˆA 16-22 AWG #10 ring lug with a green insulation jacket

54 Section I: Outdoor Installation