ADS Technologies version 5.2b1 manual Connect to the Adsl Interface, Connecting the DSL Interface

Page 12

Hardware Installation

2.5 Connect to the ADSL Interface

Step 1. Plug the RJ-11 connector end of the ADSL phone cable (included) in the DSL interface of the modem. The ADSL phone cable is provided (RJ-11 to RJ-45).

Step 2. Connect the RJ-45 connector end of the ADSL phone cable to the ADSL outlet on the wall.

Figure 2.6 Connecting the DSL Interface

2-6NetDSL Software User’s Guide

Image 12

Contents Arescom NetDSL 800 Adsl Modem Version 5.2b1 User’s GuideCopyright TrademarkHardware Installation Software InstallationBefore You Begin NetDSL ManagerConfiguration Status FeatureTools Feature TroubleshootingHot Features Before You BeginPackage Includes Bridge Packet Filtering TableMinimum System Requirements Information You Will NeedHardware Installation Diagram of the NetDSLBack Panel Interfaces Diag Diagnostic Front Panel InterfacesSafety First Setup InstructionsPersonal Safety Product HandlingConnecting to a Ethernet Port on a PC Connect to the EthernetConnecting to the Non-Uplink Port on a Network Hub Connecting the DSL Interface Connect to the Adsl InterfaceConnecting to the USB Interface Connect to the USB InterfaceConnect to Power Connecting to a Power SupplyInstallation About TCP/IPDetecting TCP/IP Windows 95/98 Installing TCP/IP Windows 95/98 Configuring TCP/IP Windows 95/98Installing TCP/IP in Windows Detecting TCP/IP in WindowsConfiguring TCP/IP in Windows Detecting TCP/IP Windows NTInstalling TCP/IP Windows NT 10Configuring TCP/IP Windows NT11Installing the Software Drivers USB Installation StepUSB Installation Step Continue USB Installation Step Page Installing the NetDSL Software NetDSL ManagerLaunching the NetDSL Manager Multiple Routers/Bridges Selection Window NetDSL ManagerSubnet window NetDSL Manager Overview TuresNetDSL Manager NetDSL Manager 6NetDSL Software User’s Guide Configuration Outline of Configuration General ConfigurationGeneral Configuration Administrative SecurityBridge Packet Filter Modify Bridge Packet Filter LAN Configuration LAN ConfigurationNetDSL. Click Exit to return to the NetDSL Manager DSL Configuration DSL ConfigurationATM PVC Properties ATM PVC PropertiesATM Service Type ATM Service TypeConfiguration File Click Save Configuration File AsConfiguration 12NetDSL Software User’s Guide Status Feature Main Status PanelEvent Log in Status LED Panel LED Panel Tab in StatusTraffic Counter Traffic Counter Tab in StatusDSL Status Table DSL Status Table Tab in StatusStatus Feature 6NetDSL Software User’s Guide Tools Feature Upgrade FirmwareUpgrade Firmware Tab in Tools Reset Router/Bridge Reset RouterTools Feature 4NetDSL Software User’s Guide Troubleshooting Cannot Detect the ModemCannot Upgrade the Firmware Modem and PC are Not in the Same SubnetAbout Configuration Parameters Terminology for Configuration ParametersExplaining IP Addresses Virtual Channel Identifier Bridge Packet FilteringEthernet Cable Pinout 2NetDSL Software User’s Guide Warranty Information Limited WarrantyStandard Warranty Service Warranties Exclusive Limitation of LiabilityWarranty Registration Before Returning a Product for RepairReturn Instructions Return Instructions 4NetDSL Software User’s Guide Declaration of Conformity