ADS Technologies version 5.2b1 manual LED Panel Tab in Status

Page 45

Status Feature

6.2 LED Panel

From the NetDSL Manager click on the Status icon, click on the Show Details button, and then select the LED Panel tab.

Depending on where your modem is located, you may have difficulty viewing the front window LEDs of the NetDSL. The LED Panel tab provides a real-time display of the front window LEDs and the DSL Line Upstream and Downstream speeds in Kbps.

Figure 6.3 LED Panel Tab in Status

To return to the Main Status panel, click the Hide Details button. To exit Status and return to the NetDSL Manager, click the Close button.

6-3

Image 45

Contents NetDSL 800 Adsl Modem Version 5.2b1 User’s Guide ArescomTrademark CopyrightSoftware Installation Hardware InstallationBefore You Begin NetDSL ManagerStatus Feature ConfigurationTools Feature TroubleshootingBefore You Begin Hot FeaturesPackage Includes Bridge Packet Filtering TableInformation You Will Need Minimum System RequirementsHardware Installation Diagram of the NetDSLBack Panel Interfaces Front Panel Interfaces Diag DiagnosticSetup Instructions Safety FirstPersonal Safety Product HandlingConnect to the Ethernet Connecting to a Ethernet Port on a PCConnecting to the Non-Uplink Port on a Network Hub Connect to the Adsl Interface Connecting the DSL InterfaceConnect to the USB Interface Connecting to the USB InterfaceConnecting to a Power Supply Connect to PowerInstallation About TCP/IPDetecting TCP/IP Windows 95/98 Configuring TCP/IP Windows 95/98 Installing TCP/IP Windows 95/98Detecting TCP/IP in Windows Installing TCP/IP in WindowsDetecting TCP/IP Windows NT Configuring TCP/IP in Windows10Configuring TCP/IP Windows NT Installing TCP/IP Windows NTUSB Installation Step 11Installing the Software DriversUSB Installation Step Continue USB Installation Step Page Installing the NetDSL Software NetDSL ManagerLaunching the NetDSL Manager NetDSL Manager Multiple Routers/Bridges Selection WindowSubnet window Tures NetDSL Manager OverviewNetDSL Manager NetDSL Manager 6NetDSL Software User’s Guide Configuration General Configuration Outline of ConfigurationAdministrative Security General ConfigurationBridge Packet Filter Modify Bridge Packet Filter LAN Configuration LAN ConfigurationNetDSL. Click Exit to return to the NetDSL Manager DSL Configuration DSL ConfigurationATM PVC Properties ATM PVC PropertiesATM Service Type ATM Service TypeClick Save Configuration File As Configuration FileConfiguration 12NetDSL Software User’s Guide Main Status Panel Status FeatureEvent Log in Status LED Panel Tab in Status LED PanelTraffic Counter Tab in Status Traffic CounterDSL Status Table Tab in Status DSL Status TableStatus Feature 6NetDSL Software User’s Guide Upgrade Firmware Tools FeatureUpgrade Firmware Tab in Tools Reset Router Reset Router/BridgeTools Feature 4NetDSL Software User’s Guide Cannot Detect the Modem TroubleshootingModem and PC are Not in the Same Subnet Cannot Upgrade the FirmwareAbout Configuration Parameters Terminology for Configuration ParametersExplaining IP Addresses Bridge Packet Filtering Virtual Channel IdentifierEthernet Cable Pinout 2NetDSL Software User’s Guide Warranty Information Limited WarrantyStandard Warranty Service Limitation of Liability Warranties ExclusiveWarranty Registration Before Returning a Product for RepairReturn Instructions Return Instructions 4NetDSL Software User’s Guide Declaration of Conformity