ADS Technologies version 5.2b1 manual Connect to Power, Connecting to a Power Supply

Page 14

Hardware Installation

2.7 Connect to Power

Step 1. Plug the power adapter in the Power interface of the NetDSL.

Step 2. Connect one end of the power cord to the power adapter, and insert the other end of the power cord to the power outlet on the wall.

Step 3. To activate the NetDSL, turn the ON/OFF switch to ON.

Figure 2.8 Connecting to a Power Supply

2-8NetDSL Software User’s Guide

Image 14

Contents Arescom NetDSL 800 Adsl Modem Version 5.2b1 User’s GuideCopyright TrademarkBefore You Begin Hardware InstallationSoftware Installation NetDSL ManagerTools Feature ConfigurationStatus Feature TroubleshootingPackage Includes Hot FeaturesBefore You Begin Bridge Packet Filtering TableMinimum System Requirements Information You Will NeedBack Panel Interfaces Hardware InstallationDiagram of the NetDSL Diag Diagnostic Front Panel InterfacesPersonal Safety Safety FirstSetup Instructions Product HandlingConnecting to a Ethernet Port on a PC Connect to the EthernetConnecting to the Non-Uplink Port on a Network Hub Connecting the DSL Interface Connect to the Adsl InterfaceConnecting to the USB Interface Connect to the USB InterfaceConnect to Power Connecting to a Power SupplyDetecting TCP/IP Windows 95/98 InstallationAbout TCP/IP Installing TCP/IP Windows 95/98 Configuring TCP/IP Windows 95/98Installing TCP/IP in Windows Detecting TCP/IP in WindowsConfiguring TCP/IP in Windows Detecting TCP/IP Windows NTInstalling TCP/IP Windows NT 10Configuring TCP/IP Windows NT11Installing the Software Drivers USB Installation StepUSB Installation Step Continue USB Installation Step Page Launching the NetDSL Manager Installing the NetDSL SoftwareNetDSL Manager Multiple Routers/Bridges Selection Window NetDSL ManagerSubnet window NetDSL Manager Overview TuresNetDSL Manager NetDSL Manager 6NetDSL Software User’s Guide Configuration Outline of Configuration General ConfigurationGeneral Configuration Administrative SecurityBridge Packet Filter Modify Bridge Packet Filter LAN Configuration LAN ConfigurationNetDSL. Click Exit to return to the NetDSL Manager DSL Configuration DSL ConfigurationATM PVC Properties ATM PVC PropertiesATM Service Type ATM Service TypeConfiguration File Click Save Configuration File AsConfiguration 12NetDSL Software User’s Guide Status Feature Main Status PanelEvent Log in Status LED Panel LED Panel Tab in StatusTraffic Counter Traffic Counter Tab in StatusDSL Status Table DSL Status Table Tab in StatusStatus Feature 6NetDSL Software User’s Guide Tools Feature Upgrade FirmwareUpgrade Firmware Tab in Tools Reset Router/Bridge Reset RouterTools Feature 4NetDSL Software User’s Guide Troubleshooting Cannot Detect the ModemCannot Upgrade the Firmware Modem and PC are Not in the Same SubnetExplaining IP Addresses About Configuration ParametersTerminology for Configuration Parameters Virtual Channel Identifier Bridge Packet FilteringEthernet Cable Pinout 2NetDSL Software User’s Guide Standard Warranty Service Warranty InformationLimited Warranty Warranties Exclusive Limitation of LiabilityReturn Instructions Warranty RegistrationBefore Returning a Product for Repair Return Instructions 4NetDSL Software User’s Guide Declaration of Conformity