Configuration
ATM PVC Properties
After typing in the name and clicking OK, the ATM PVC Properties panel will appear. Note that a maximum of 8 PVCs may be defined. If you
Figure 5.6 ATM PVC Properties
The ATM PVC Properties panel allows you to change the name of the selected ATM interface and to set the values of Virtual Path Identifier (VPI) and the Virtual Channel Identifier (VCI). The minimum and maximum values of the VCI are 32 and 4,095, respectively. VCI values from zero to 31 are reserved for well- known protocols. Note that two ATM connections can have the same VCI value only if the VPIs are distinct.
Once you have finished setting these parameters, click Apply to review the parameters you have entered and then click Finish to send settings to the NetDSL. Click Exit to return to the NetDSL Manager.