ADTRAN 5045 system manual Navigating the Terminal Menu, Terminal Menu Window

Page 40

Section 5 User Interface Guide	TRACER 5045 System Manual

1.NAVIGATING THE TERMINAL MENU

The TRACER 5045 menu system can be accessed with a VT100 compatible terminal that is connected to the RS-232 port located on the back of the unit and set to 9600 bits per second, 8 data bits, 1 stop bit, and no parity. Flow control on the serial interface should be configured to NONE for proper operation. Once a terminal is connected, press <Ctrl + L> to refresh the current screen. If password access has been enabled, the ENTER PASSWORD message displays at the bottom of the TRACER 5045 System Status menu.

All TRACER 5045 systems are shipped factory default with password protection disabled.

Terminal Menu Window

The TRACER 5045 uses a series of menu pages and a single main menu page to access its many features. The main menu page (see Figure 1) provides a link to all available configuration/status pages.

After connecting a VT100 terminal to the TRACER 5045, press <Ctrl + L> to redraw the current screen.

Figure 1. Main Menu Screen

40

© 2003 ADTRAN, Inc.

612805045L1-1A

Image 40

Contents Tracer To the Holder of the Manual TrademarksAbout this Manual Revision History Safety Instructions Save These Important Safety InstructionsFCC-Required Information Radio Frequency Interface StatementFCC Output Power Restrictions Exposure to Radio Frequency FieldsRepair and Return Pre-Sales Inquiries and Applications SupportPost-Sale Support Installation and Maintenance SupportTraining Table of Contents Table of Contents Tracer 4208 System Manual System Description Features and Benefits Configuration and ManagementSystem Overview OperationalReceiver Power Line-of-SiteReceiver Sensitivity Antenna Information Other ConsiderationsMicrowave Path Engineering Basics Tracer 5045 System Manual LINE-OF-SITE TerminologyDecibels Calculating the Fade MarginReceiver Power Transmitted Power PT Antenna GainPath Distance d Carrier Wavelength λSystem Losses L Path Loss LP Typical Coaxial Loss for Common Cable TypesReceiver Sensitivity Antenna InformationAntenna Alignment Path Loss for Given Path Lengths MilesAntenna Beam Patterns Tracer Rssi Test PointsFresnel Zones, Earth Curvature, & Antenna Heights Minimum Antenna Height for Given Path Lengths Other Considerations Path AvailabilityTerrain Terrain Factor Description Climate Climate Factor DescriptionMicrowave Path Engineering Basics Tracer 5045 System Manual At-A-Glance Specifications Reviewing the Front Panel DesignEquipment Dimensions Power RequirementsReviewing the Front Panel Design Rssi Monitoring InterfaceReviewing the Tracer 5045 Rear Panel Design RS-232 Connection DB-25 Terminal Use Rear Panel Description Name ConnectorRS-232 Connection Pinout RS-232 Connection Modem Use Tracer 5045 DCE to Terminal DTE Diagram DB-25Tracer 5045 DCE to Personal Computer DB-9 Alarm Contacts Plug-In Terminal Block 10/100BaseT/TX Connections RJ-48CTracer 5045 DCE to Modem DCE DB-25 100BaseT/Tx Interface PinoutDC Power Connection Plug-In Terminal Block Antenna Interface N-Type connectorAT-A-GLANCE Specifications FuseHardware Description Specification Transmitter Hardware Description Specification Power Engineering Guidelines Tracer 5045 System Manual Network Turnup Procedure Unpack and Inspect the SystemContents of Adtran Shipment IntroductionTools Required Unpack and Inspect the SystemChannel Selection Grounding InstructionsConnecting the Ethernet Interfaces Supplying Power to the UnitMounting Options Terminal Menu and System Control Navigating the Terminal MenuMenu Descriptions Navigating the Terminal Menu Terminal Menu WindowNavigating using the Keyboard Keys Password ProtectionTerminal Menu and System Control To do this Press this keyMenu Descriptions Contact InformationRx Power Tx PowerRF Status Ethernet StatusMain Menu Tracer System Configuration Default password for the Tracer 5045 is tracer Tracer Link Performance History Ethernet Switch Status Ethernet Switch Status RX Packets Dropped User Interface Guide Tracer 5045 System Manual Installing/Troubleshooting the Tracer Hardware OverviewLED Indicators PWR LED OverviewTST LED RF Down LEDRF Errors STEP-BY-STEP TroubleshootingRF LOW LED LAN LEDsINSTALLING/TROUBLESHOOTING the Tracer Hardware Installing/Configuring Ethernet Hardware Troubleshooting Guide Tracer 5045 System Manual