6. Upgrading the SmartView's firmware
The SmartView XPro uses flash memory technology which enables the firmware code to be upgraded by the user. New keyboards, mice operating systems and drivers are being launched all the time. From time to time the SmartView's firmware will be updated to provide support for these new devices. You can take advantage of these upgrades free of charge during the warranty period.
Upgrades are performed by connecting a PC's serial port to the SmartView's serial port and running an upgrade program on the PC. This upgrade program downloads the new firmware to the SmartView XPro and checks that the data has been programmed correctly.
You can check the version of the firmware that is currently loaded into your SmartView using the
To perform a firmware upgrade on your SmartView XPro you will need a suitable serial upgrade cable and an IBM PC compatible computer with an RS232 serial port and an operating system that supports DOS. Suitable upgrade cables with
You will also need to obtain the latest version of the SmartView XPro firmware which is available by request from www.addertec.com. Please ensure that you have your product serial number and model number at hand when requesting an upgrade.
Note: The normal flash upgrade process does not clear the computer names, user names, security passwords or other configuration settings.
SmartView XPro | Installation and Use | Page 66 |