To select the computer with SHARED access press:
e or f
When a computer is selected in SHARED mode, the computer’s video picture will be displayed on all the KVM consoles that are connected to that computer. Only one user will have control of the computer’s keyboard and mouse at any one time. If no keyboard or mouse activity has been detected for the timeout period (see section 3.6.12) then other KVM consoles may gain control.
To select the computer with EXCLUSIVE access press:
je or jf
When a computer is selected in EXCLUSIVE mode, the computer’s video picture will only be displayed one the KVM console that has exclusive access. Other KVM consoles will not be able to access the computer or view its video until the exclusive user has selected another computer or logged out. This mode prevents other KVM consoles from using the computer and so should be used with care.
To select the computer with VIDEO ONLY access press:
be or bf
When a computer is selected in VIDEO ONLY mode, the computer’s video picture will be displayed on the KVM console’s monitor but they keyboard and mouse will not control the computer. The “VIDEO ONLY” message will be displayed under the confirmation banner if this has been enabled.
SmartView XPro | Installation and Use | Page 50 |