Sennheiser HMEC 26-2 Replacing the headband paddings, Care and maintenance, Hmec

Page 21

Replacing the headband paddings

Care and maintenance

Replacing the headband paddings

For reasons of hygiene, you should replace the headband paddings annually.

Pull the Ziploc type fastening strips of the old headband paddings apart. If necessary, use a pointed tool.

Put the new headband paddings around the headbands.

Attach the new headband paddings by joining the fastenings strips.

20 HMEC 26-2

Image 21

Contents HMEC Preventing health problems and accidents Important safety informationOnly clean the product with a soft, dry cloth Preventing damage to the product and dysfunctionsIntended use of the product includes Intended useFeatures The HMEC 26-2 headsetPackage contents Putting on the headset OperationFlipping away one earcup OperationTurning the microphone boom Positioning the microphoneAdjusting the volume directly on the audio system Adjusting the microphone sensitivityHearing damage due to high volumes The control units of the HMEC 5 BOOM switch L /RControl unit 1 2 3 4 5 6Cable -CP Cable -CP-2 Cable -KP Cable -KP-2 Cable -NP Cable -RP-2 Cable -DP-210 HMEC Switching NoiseGard on/off Using the headsetAdjusting the volume Switching between mono and stereo modeChanging the left and right stereo channel Powering NoiseGard via two rechargeable batteries Activating the “auto shut-off” functionMeaning Set the switch to the position ASO Switching the TalkThrough function on/off HMEC 26-2-T onlyDanger of accident due to reduced attention Connecting a mobile telephoneConnecting an additional audio player Attaching the belt clip 18 HMEC Attaching the cable clipCare and maintenance Cleaning and maintaining the headsetReplacing the ear pads Put the new headband paddings around the headbands Replacing the headband paddingsAttach the new headband paddings by joining the fastenings strips 20 HMECAccessories Accessories and spare partsCable clip Spare partsAudio cable, length 0.6 m 2 x 3.5 mm stereo jack plug Audio cable, length 0.6 m, 2 x 2.5 mm jack plugProduct and cable variants Cat. No ModelPart Number 24 HMEC1 2 3 4 5 6 7 8 9 A B C D E F G These headsets can be combined with all cables see pageSpecifications SpecificationsHeadphones 26 HMECMicrophone incl. preamplifier General dataNoiseGard professional Cable -V-KX-2 Connector assignmentCable -CP, -CP-2, -B-CP-2 Cable -NPCable -DP-2 Cable -RP-2Cable -KP, -KP-2, -B-K-2, -B-KP-2, -BV-K-2 Cable -B-K-2Manufacturer Declarations WarrantyIn compliance with the following requirements In compliance withSennheiser electronic GmbH & Co. KG