NorthBridge SIS649 Chipset Configuration
Primary Graphics Adapter | [PCI Express] |
CPU FSB Set To Chipset Timing | [FSB: 800MHz] |
Auto Detect DRAM Frequency | [Enabled] |
CPU:DRAM Frequency Ratio | [3:2] |
Real CPU FSB:DRAM = 800(200*4): 533(266*2) MHz | |
DRAM CAS# Latency | [By SPD] |
Dual Core PATCH | [Enabled] |
Primary Graphics Adapter [PCI Express]
Allows selection of the graphics controller to use as a primary boot device. Configuration options: [PCI] [PCI Express]
CPU FSB Set To Chipset Timing [FSB: 533MHz]
Displays
Auto Detect DRAM Frequency [Enabled]
When set to [Enabled], this allows the BIOS to detect the DRAM frequency automatically. Configuration options: [Disabled] [Enabled]
CPU:DRAM Frequency Ratio [DDR 400 MHz]
Displays
Real CPU FSB:DRAM = 532(133*4): 400(200*2) MHz
Displays
DRAM CAS# Latency [By SPD]
Controls the latency between the SDRAM read command and the time the data actually becomes available. Configuration options: [By SPD] [2T] [2.5T] [3T]
Dual Core PATCH [Enabled]
Enables or disables the Dual Core PATCH.
Configuration options: [Enabled] [Disabled]
Chapter 2: BIOS setup |