Asus P5SD2-FM Hardware Monitor, Power On By RTC Alarm Disabled, Smart Q-Fan Function Enabled

Page 62

Power On By RTC Alarm [Disabled]

Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm Second appear with set values.

Configuration options: [Disabled] [Enabled]

2.5.7Hardware Monitor

Hardware Monitor

MB Temperature

CPU Temperature

[51oC/122.5oF]

MB Temperature

[41oC/105.5oF]

CPU Fan Speed

[3813 RPM]

Chassis Fan Speed

[N/A]

VCORE Voltage

[ 1.320V]

3.3V Voltage

[ 3.345V]

5V Voltage

[ 5.094V]

12V Voltage

[11.880V]

Smart Q-FAN Function

[Disabled]

MB Temperature [xxxoC/xxxoF]

CPU Temperature [xxxoC/xxxoF]

The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select Disabled if you do not wish to display the detected temperatures.

CPU Fan Speed [xxxxRPM] or [N/A]

Chassis Fan Speed [xxxxRPM] or [N/A]

The onboard hardware monitor automatically detects and displays the CPU/ Chassis fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A.

VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators.

Smart Q-Fan Function [Enabled]

Allows you to enable or disable the ASUS Q-Fan feature that smartly adjusts the fan speeds for more efficient system operation.

Configuration options: [Disabled] [Enabled]

2-20

Chapter 2: BIOS setup

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Motherboard E2471 First Edition March Copyright 2006 ASUSTeK Computer INC. All Rights ReservedContents Bios setup APM Federal Communications Commission Statement Canadian Department of Communications StatementElectrical safety Operation safetyP5SD2-FM specifications summary Internal connectors Support CD contents Form Factor Page Hardware1 information Before you proceed Screw holes Placement directionMotherboard overview Motherboard layout P5SD2-FMLayout Contents Internal connectors Installing the CPU Central Processing Unit CPURetention tab Load lever PnP cap Asus P5SD2-FM Installing the CPU heatsink and fan Push down two fasteners at a time Uninstalling the CPU heatsink and fan Narrow end of the groove Dimm sockets location Memory ConfigurationsSystem memory Removing a Dimm Installing a DimmTo install a Dimm Break on the socketExpansion slots Installing an expansion cardConfiguring an expansion card IRQ assignments for this motherboard Interrupt assignmentsStandard interrupt assignments PCI slots PCI ExpressPCI Express x16 slot Jumpers Clear RTC RAM ClrtcBios Recovery 3-pin RECOVERY1 Password Skip USB device wake-up 3-pin USBPW12, USBPW34, USBPW56, USBPW78LAN port LED indications ConnectorsRear panel connectors Audio 2, 4, 6, or 8-channel configuration Port Channel HeadsetPower LED connector 3-1 pin Pled Internal connectorsFloppy disk drive connector 34-1 pin Floppy IDE connectors 40-1 pin PRIIDE, Secide Serial ATA Master/Slave connectors SATA4Speaker out connector 4-pin Speaker USB connectors 10-1 pin USB56, USB78 Digital audio connector 3 pin SPDIFO2ATX power connectors 24-pin EATXPWR, 4-pin ATX12V CPUInternal audio connector 4-pin AUX Front panel audio connector 10-1 pin FpaudioPower/Soft-off button Black 2-pin Pwrsw System panel connector 10-1 pin FpanelSystem power LED Green 2-pin Pled Reset button Blue 2-pin ResetHardware information Bios setup Bios setup program Navigation keys Bios menu screenMenu bar Sub-menu items Configuration fieldsMenu items Pop-up windowSystem Time Legacy Diskette a DisabledMain menu System Date Day xx/xx/xxxxType Auto LBA/Large Mode AutoPrimary, Secondary, Third, and Fourth IDE Master/Slave Block Multi-sector Transfer AutoDMA Mode Auto Sata Mode Selection 4PIDE+4SIDEPIO Mode Auto 32Bit Data Transfer EnabledSystem Memory System InformationProcessor Advanced menu CPU Configuration CPU Internal Thermal Control Auto Auto Detect CPU Frequency EnabledChipset NorthBridge SIS649 Chipset Configuration Primary Graphics Adapter PCI ExpressSouthBridge SiS966 Chipset Configuration Onboard SiS966 LAN Device EnabledOnboard 1394 Controller Enabled Serial Port1 Address 3F8/IRQ4Plug and Play O/S No PCI PnPClear Nvram No IRQ-xx assigned to PCI Device Allocate IRQ to PCI VGA YesOffBoard PCI/ISA IDE Card Auto DMA Channel x PCI DeviceUSB Configuration Power menu AC Power Loss Restart Previous State APM ConfigurationPower Button Mode Off/On Power On By PCI Devices DisabledSmart Q-Fan Function Enabled Power On By RTC Alarm DisabledMB Temperature xxxoC/xxxoF CPU Temperature xxxoC/xxxoF Hardware Monitor1st ~ xxth Boot Device xxx Drive Boot menuBoot Device Priority Boot Settings Configuration Change Supervisor Password SecurityUser Access Level Full Access Change User PasswordExit menu Clear User PasswordPassword Check Setup Exit & Discard Changes Load Setup DefaultsExit & Save Changes Discard Changes
Top Page Image Contents