Asus K8V-F, VIA VT8237, VIA K8T800 manual Connectors, Rear panel connectors, Bios Recovery procedure

Page 26

4.BIOS Recovery procedure

Please set on the board the BIOS Recovery jumper BIOS-R to 2-3.

Visit the Fujitsu Siemens website to download the latest BIOS file foryour motherboard and rename it to K8VF.ROM. Save the BIOS file to a floppy disk.

Insert this floppy disk into the floppy disk drive and start the PC. The BIOS Recovery will start automatically.

When the BIOS Recovery is finished switch off the system. Set the BIOS Recovery jumper BIOS-R back to 1-2.

Switch the system on and load the dafault setting in the BIOS and save it (by pressing the DEL key after switch on the system)

1.9 Connectors

This section describes and illustrates the rear panel and internal connectors on themotherboard.

1.9.1 Rear panel connectors

1

2

3

4

5

6

7

12

11

10

9

8

1.PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse.

2.IEEE 1394 port. This 6-pin 1394 port connects provides high speed connectivityfor audio/video devices, storage peripherals, or PCs.

1-16	Chapter 1: Product introduction

Image 26

Contents Motherboard E1495 First Edition December Contents Bios information ChapterContents Federal Communications Commission Statement Operation safety SafetyinformationElectrical safety Conventions used in this guide Where to find more informationAboutthisguide K8V-Fspecificationsummary CPUBios features Industry standard Manageability Form Factor Chapter Special features WelcomeIntegrated 10/100 Mbps LAN Channel and digital audio solutionAsus EZ Flash Bios Hardware information AGP 8X supportOnboard LED Before you proceedMotherboard overview Motherboard layoutPlacement direction Screw holesInstalling the CPU Central Processing Unit CPUAngle Overview Memory configuratinsSystem memory Installing a Dimm Removing a DimmExpansion slots Installing an expansion cardConfiguring an expansion card Standard interrupt assignments IRQ assignments for this motherboardPCI slots AGP slotClear RTC RAM CLRTC1 Keyboard power 3-pin KBPWR1Jumpers K8V-F Keyboard Power Setting Bios Recovery procedure ConnectorsRear panel connectors Internal connectors Auxilliary connector 4-pin AUX Serial ATA connectors 7-pin SATA1, SATA2 Important notes on Serial ATACPU and Chassis Fan Connectors 3-pin CPUFAN1, CHAFAN1 Ieee 1394 connector 10-1 pin IE13941ATX power connectors 20-pin ATXPOWER1, 4-pin ATX12V Front panel audio connector 10-1 pin FpaudioUSB headers 10-1 pin USB56, USB78 ATX Power Switch / Soft-Off Switch Lead 2-pin Pwrsw System panel connector 20-pin PANEL1System Power LED Lead 3-1 pin Pled Reset Switch Lead 2-pin ResetProduct Introduction Bios information Managing and updating your Bios Creating a bootable floppy diskUsing Afudos to copy the current Bios Using Afudos to update the BiosAfudos /ifilename.rom Using Asus EZ Flash to update the Bios To update the Bios using Asus EZ FlashBIOSSetupprogram Bios menu screen Menu items System Date Day xx/xx/xxxx MainmenuSystem Time Legacy Diskette a 1.44M, 3.5Primary/Secondary IDE Master/Slave System Information 32Bit Data Transfer DisabledAcoustic Management Disabled Smart Monitoring AutoCPU Configuration AdvancedmenuHT Frequency 800 MHz HT Tristate Enable DisabledCRC Flood Enable Disabled HT Data Width Upstream 16 BITBank Interleaving Auto Memory ConfigurationMemclock Mode Auto CAS Latency CL Auto L2 Cache BG Scrub Disabled Data Cache BG Scrub DisabledCool N’ Quiet Enabled ChipsetPrimary Graphics Adapter AGP AGP Mode AGPAGP Fast Write Enabled Search for MDA Resources NoPCI Delay Transaction Disabled MPS RevisionUSB 2.0 Controller Mode HiSpeed USB 1.1 Ports Configuration USB 8 PortsUSB 2.0 Controller Enabled Legacy USB Support AutoOnboard Devices Configuration Parallel Port Mode Normal Parallel Port IRQ IRQ7PCIPnP Powermenu APM Configuration Power On By RTC Alarm Disabled Video Power Down Mode SuspendHard Disk Power Down Mode Enabled Power On External Modems DisabledVcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage CPU Temperature xxxC/xxxF MB Temperature xxxC/xxxFHardware Monitor 1st ~ xxth Boot Device 1st Floppy Drive Boot menuBoot Device Priority Boot Settings Configuration Security Interrupt 19 Capture DisabledChange Supervisor Password Clear User Password User Access Level Full AccessChange User Password Password Check SetupExit & Save Changes Load Setup DefaultsExitmenu Exit & Discard Changes