Asus VIA VT8237, VIA K8T800, K8V-F manual Boot Settings Configuration

2.6.2 Boot Settings Configuration

Boot			Allows BIOS to skip
Boot Settings Configuration			Allows BIOS to skip
			tests while
Quick Boot		[Enabled]	certain tests while
			. This will
Quick Boot			booting. This will
Full	Logo	[Enabled]	the time
Full Screen Logo			decrease the time
AddOn ROM	Mode	[Force BIOS]	needed to boot the
AddOn ROM	Display Mode	[Force BIOS]	needed to boot the
Bootup Num-Lock		[On]	.
Bootup Num-Lock		[On]	system.
PS/2 Mouse		[Auto]
PS/2 Mouse Support
Wait for ‘F1’ If Error		[Disabled]
Wait for ‘F1’ If Error
Hit ‘DEL’	Message Display	[Enabled]
Hit ‘DEL’
Interrupt	19	[Disabled]
	19 Capture

Quick Boot [Enabled]

Enabling this item allows BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Configuration options: [Enabled] [Disabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature. Configuration options: [Enabled] [Disabled]

Make sure the Full Screen Logo item is set to [Enabled] if you wish to use the ASUS MyLogo™ feature.

AddOn ROM Display Mode [Force BIOS]

Sets the display mode for option ROM.

Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Configuration options: [On] [Off]

PS/2 Mouse Support [Auto]

Allows you to enable or disable support for PS/2 mouse.

Configuration options: [Auto] [Disabled] [Enabled]

Wait for ‘F1’ If Error [Disabled]

When set to Enabled, the system waits for F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled]

Hit ‘DEL’ Message Display [Enabled]

When set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Enabled] [Disabled]

ASUS K8V-F motherboard user guide 2-29