Asus VIA VT8237, K8V-F System Information, Smart Monitoring Auto, 32Bit Data Transfer Disabled

Page 45

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Disabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

Acoustic Management [Disabled]

As well as hard disk and optical date drives such as CD-ROM, CD-RW and DVD are also responsible for generating noise in the PC. Therefore the BIOS support the acoustic management feature to reduce the noise. In the Main menue please select the IDE drive, which should be support the Acoustic management and press Enter. When the IDE device can support the acoustic management then you can see this option in the BIOS setup. The following options are available:

[Hard Drive] Configuration options: [Disabled] [Silent]

[Optical Drive] Configuration options: [Disabled:] [Medium] (default) [Silent]

For optimal performance for hard drive and optical drive please disabled the acoustic management.Acoustic Management [Disabled]

2.3.5 System Information

This menu gives you an overview of the general system specifications. The items in this menu are auto-detected by the BIOS.

AMI BIOS

AMI BIOS

Version : 08.00.08

Version : 08.00.08

Build Date : 10/21/03

Build Date : 10/21/03

ID	: K8V-F028
ID	: K8V-F028

System Memory

System Memory

Size : 256MB

Size : 256MB

AMI BIOS

This item displays the auto-detected BIOS information.

System Memory

This item displays the auto-detected system memory.

ASUS K8V-F motherboard user guide

2-11

Image 45

Contents Motherboard E1495 First Edition December Contents Chapter Bios informationContents Federal Communications Commission Statement Safetyinformation Electrical safetyOperation safety Where to find more information AboutthisguideConventions used in this guide CPU K8V-FspecificationsummaryBios features Industry standard Manageability Form Factor Chapter Welcome Special featuresAsus EZ Flash Bios Channel and digital audio solutionIntegrated 10/100 Mbps LAN Hardware information AGP 8X supportBefore you proceed Onboard LEDMotherboard layout Motherboard overviewScrew holes Placement directionCentral Processing Unit CPU Installing the CPUAngle Memory configuratins System memoryOverview Removing a Dimm Installing a DimmInstalling an expansion card Configuring an expansion cardExpansion slots IRQ assignments for this motherboard Standard interrupt assignmentsAGP slot PCI slotsKeyboard power 3-pin KBPWR1 JumpersClear RTC RAM CLRTC1 K8V-F Keyboard Power Setting Connectors Rear panel connectorsBios Recovery procedure Internal connectors Auxilliary connector 4-pin AUX Important notes on Serial ATA Serial ATA connectors 7-pin SATA1, SATA2Ieee 1394 connector 10-1 pin IE13941 CPU and Chassis Fan Connectors 3-pin CPUFAN1, CHAFAN1Front panel audio connector 10-1 pin Fpaudio ATX power connectors 20-pin ATXPOWER1, 4-pin ATX12VUSB headers 10-1 pin USB56, USB78 System Power LED Lead 3-1 pin Pled System panel connector 20-pin PANEL1ATX Power Switch / Soft-Off Switch Lead 2-pin Pwrsw Reset Switch Lead 2-pin ResetProduct Introduction Bios information Creating a bootable floppy disk Managing and updating your BiosUsing Afudos to update the Bios Using Afudos to copy the current BiosAfudos /ifilename.rom To update the Bios using Asus EZ Flash Using Asus EZ Flash to update the BiosBIOSSetupprogram Bios menu screen Menu items System Time MainmenuSystem Date Day xx/xx/xxxx Legacy Diskette a 1.44M, 3.5Primary/Secondary IDE Master/Slave Acoustic Management Disabled 32Bit Data Transfer DisabledSystem Information Smart Monitoring AutoAdvancedmenu CPU ConfigurationCRC Flood Enable Disabled HT Tristate Enable DisabledHT Frequency 800 MHz HT Data Width Upstream 16 BITMemory Configuration Memclock Mode AutoBank Interleaving Auto CAS Latency CL Auto Data Cache BG Scrub Disabled L2 Cache BG Scrub DisabledChipset Cool N’ Quiet EnabledAGP Fast Write Enabled AGP Mode AGPPrimary Graphics Adapter AGP Search for MDA Resources NoMPS Revision PCI Delay Transaction DisabledUSB 2.0 Controller Enabled USB 1.1 Ports Configuration USB 8 PortsUSB 2.0 Controller Mode HiSpeed Legacy USB Support AutoOnboard Devices Configuration Parallel Port IRQ IRQ7 Parallel Port Mode NormalPCIPnP Powermenu APM Configuration Hard Disk Power Down Mode Enabled Video Power Down Mode SuspendPower On By RTC Alarm Disabled Power On External Modems DisabledCPU Temperature xxxC/xxxF MB Temperature xxxC/xxxF Hardware MonitorVcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage Boot menu Boot Device Priority1st ~ xxth Boot Device 1st Floppy Drive Boot Settings Configuration Interrupt 19 Capture Disabled Change Supervisor PasswordSecurity Change User Password User Access Level Full AccessClear User Password Password Check SetupExitmenu Load Setup DefaultsExit & Save Changes Exit & Discard Changes