HyperTransport Configuration
HyperTransport Configuration |
|
HT Tristate Enable | [Disabled] |
CRC Flood Enable | [Disabled] |
HT Frequency | [800MHz] |
HT DATA Width (Upstream) | [16 BIT] |
HT DATA Width (Downstream) | [16 BIT] |
Enable link tristate during the disconnected state of an LDTSTOP..
HT Tristate Enable [Disabled]
This item enables or disables the HyperTransport Tristate that allows tristate link during the disconnected state of an LDTSTOP.
Configuration options: [Disabled] [Enabled]
CRC Flood Enable [Disabled]
This item enables or disables the CRC Flood that allows synchronized packet generation on CRC Error. Configuration options: [Disabled] [Enabled]
HT Frequency [800 MHz]
This item allows you to select the frequency of HyperTransport transfer from K8 CPU to AGP. Configuration options: [200 MHz] [400 Mhz] [600 Mhz] [800 Mhz]
HT DATA Width (Upstream) [16 BIT]
This item allows selection of the HyperTransport upstream data width. Configuration options: [16 BIT] [8 BIT]
HT DATA Width (Downstream) [16 BIT]
This item allows selection of the HyperTransport downstream data width. Configuration options: [16 BIT] [8 BIT]
ASUS |