2.5.6 | APM Configuration |
| |
Power Management/APM | [Enabled] | Go into On/Off, Standby | |
|
|
| or Suspend when Power |
Power Button Mode | [On/Off] | button is pressed. | |
Suspend Power Saving Type | [C3] |
| |
Restore on AC Power Loss | [Last State] |
| |
Suspend Time Out | [Disabled] |
| |
Hard Disk Time Out (Minute) | [Disabled] |
| |
Video Power Down Mode | [Suspend] |
| |
Hard Disk Power Down Mode | [Enabled] |
| |
Power On RTC Alarm | [Disabled] |
| |
Power On External Modems | [Disabled] |
| |
Power On PCI Device | [Disabled] |
| |
Power on PS/2 Keyboard | [Disabled] |
| |
Power on PS/2 Mouse | [Disabled] |
| |
Power on OnBoard LAN | [Disabled] |
| |
Power Management/APM [Enabled]
Allows you to enable or disable the Advanced Power Management (APM) feature. Configuration options: [Disabled] [Enabled]
The following items appear only when the Power Management/APM item is set to [Enabled].
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the power button is pressed. Configuration options: [On/Off] [Standby] [Suspend]
Suspend Power Saving Type [C3]
This item allows you to set the suspend power saving type.
Configuration options: [C3] [S1]
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state whatever was the system state before the AC power loss. Configuration options: [Last State] [Power Off] [Power On]
Suspend Time Out [Disabled]
Allows you to select the specified time at which the system goes on suspend mode. Configuration options: [Disabled] [1 Min] [2 Min] [4 Min] [8 Min] [10 Min] [20 Min] [30 Min] [40 Min] [50 Min] [60 Min]
Hard Disk Time Out (Minute) [Disabled]
Allows you to select the specified time in minute at which the hard disk goes on standby mode. Configuration options: [Disabled] [1]...[15]
ASUS |