Canon Model 6401 B manual Running Load, Printing & Plotting Recordings, Running Plot, Answers

Page 17

Field Test Unit Software

3.4.1 Running LOAD

1. Connect Data Logger to FTU. (connect datacassette)

2.Type:- RUN “LOAD” then press Return (or RUN “PLOT”)

3.Answer the relevant questions described below

3.5 PRINTING & PLOTTING RECORDINGS

The program “PLOT” is used to print or plot the recorded information from the Data Logger. This information may be from stored files in RAM or on cassette or alternatively, “PLOT” will print/plot directly from a Data Logger connected to the FTU.

3.5.1 Running PLOT

1. Connect datacassette or Data Logger to FTU

2. Connect & RESET printer Or plotter to FTU

3.Type:- RUN then press Return (or RUN “PLOT”)

4.Answer the relevant questions described below

3.6LOAD/PLOT - OPERATOR RESPONSES

Question

input from Keyboard input from File; or Create Command

file?

Answers

K = Keyboard entry of commands

F = Commands are to be read from a previously created command file

C = Store entered commands in a command file for future use

Enter the way you wish commands to be entered to the program

Note:- if “C” is selected, the program creates a command fife only. It does
not perform any LOAD/COPY/PLOT function.
			...
Cassette or Ram			file	C = Cassette storage
COMMAND file?				R = Ram storage
Enter the storage			device	of the command file

Section 3. (UN)LOAD, PLOT& COPY

11

Image 17

Contents Starlog Copyright Notice Table of Contents Recordings To CASSETTE/RAMLOAD/PLOT Operator Responses Running PlotxCommands Direct Commands from FTU-PROMDisplay Format ValuesField Test Unit Software Contents Memory structure Installation Why use a FTU?Running a Program Switching on the FTUAttaching the cassette REDLoading a Program Saving a ProgramGrey BlackFTU Memory Guide Filename ExtensionsPLOT/COPY/FTUC Loading PLOT’ in 16K RAM FTU Standard Features Running Copy Command FilesCopying Files Timing considerations Operator Responses Question AnswerPrinting & Plotting Recordings Running LoadRunning Plot AnswersFile name,type Hhmm Ddmmyy Buffer PRINT/PLOT/LOAD/COPY Examples Print Example Sample Field DescriptionsStart Operator Response QuestionPlot Example Load Example Hhmm Ddmmyy File 50,14 Load Program control variablesInput Copy ExampleQuestionMeaning Plotx Operator ResponsesSample Field Description = GreenLines on the X-710 printer to produce L/F Header Message FormatHeader message Line Data messages Line 2 onwards Data Message FormatEND Message Format END messageData Storage Format Operation CommandINITIALlZATlON 5 ‘space’ CommandCursor KEY Commands Channel Addresses Next Locate 0,1PRINT USING####BL Locate 0,3PRINT? LB PNFTU.X07 Program Listing CLSClsinputloc Lgoto If M=1 then M=2 Else M=1 Goto PRINT#1,KKKON Error Goto 0V =Clsinputblockbgoto Clsinputput NextDisplay of the Loggers Current Memory Values Key Stroke Function User Defined Screen FormatExample Commands to Modify Data Logger FTU to lock up on power onDisplay TimeTime X-07 Direct Commands from FTU-PROMS300 BaudFree QuitIndirect and Miscellaneous Commands CLR Summary of CommandsHome ALL Recorded Data will be Lost Pdlftu