Canon Model 6401 B manual Hhmm Ddmmyy

Page 19

Field Test Unit Software

Unload Format, Pointers & buffer, Buffer or Done ?

F = FORMAT (set of

Block,Location,Count)

P = Unload a buffer & all buffer pointers (B1,L0,C128)

B = Unload a buffer (no pointers) (you enter the B,L,C yourself)

D = DONE (proceed to (un)load)

Enter the format of the data you wish to operate on

F means that the data you wish to use is to be a contiguous block of logger memory.

B means the data is contained in one of the loggers 7 buffers.

P is the same as B except the data is to be used for future use and the buff-

er pointers are also to be saved.				.		.
---	.	.
Buffer number (0-7)			number of buffer to unload
Enter the buffer number (0			to 7)	of the data you wish to operate on. Buffer
0 is normally used			---		.
B,L,C?
			Block,Location,Count			of the data to
			unload from the data logger

Enter the block and location (start) of the data and the number of bytes (count) of data you wish to operate on

Unload Time	Time that logger stored first log HHMM
Enter Date & Time	DDMMYY entry (HHMMSS
HHMM DDMMYY	DDMMYY) SS - optional 1300 121086
?	HH = hours MM = minutes (SS = seconds
	optional) DD = day MM = month
	YY=year

An initial time is required in order to time reference all logged data. The

time entered is used along	with the log interval to	be calculated when each
log was made		.. .......	.
.		.. .......	.
Enter Input file	Filename,extension	(,D is	default
name, type	extension)

Enter the name of the stored data you wish to use. This name must be the same as the one used when the data was first stored

plot Format, Pointers F = Formatted input. (set of B,L,C)

&buffer or Done? P = Buffer & Pointer format D = Done (ready to Plot)

Section 3. (UN)LOAD, PLOT& COPY

13

Image 19

Contents Starlog Copyright Notice Table of Contents Running Plotx To CASSETTE/RAMRecordings LOAD/PLOT Operator ResponsesValues Direct Commands from FTU-PROMCommands Display FormatField Test Unit Software Contents Memory structure Installation Why use a FTU?RED Switching on the FTURunning a Program Attaching the cassetteBlack Saving a ProgramLoading a Program GreyFTU Memory Guide Filename ExtensionsPLOT/COPY/FTUC Loading PLOT’ in 16K RAM FTU Standard Features Copying Files Command FilesRunning Copy Timing considerations Operator Responses Question AnswerAnswers Running LoadPrinting & Plotting Recordings Running PlotFile name,type Hhmm Ddmmyy Buffer Start Sample Field DescriptionsPRINT/PLOT/LOAD/COPY Examples Print Example Operator Response QuestionPlot Example Load Example Hhmm Ddmmyy File 50,14 Load Program control variablesInput Copy ExampleQuestionMeaning Plotx Operator ResponsesSample Field Description = GreenLines on the X-710 printer to produce Header message Line Header Message FormatL/F END message Data Message FormatData messages Line 2 onwards END Message FormatData Storage Format Operation CommandCursor KEY Commands 5 ‘space’ CommandINITIALlZATlON CLS Next Locate 0,1PRINT USING####BL Locate 0,3PRINT? LB PChannel Addresses NFTU.X07 Program ListingNext PRINT#1,KKKON Error Goto 0V =Clsinputloc Lgoto If M=1 then M=2 Else M=1 Goto Clsinputblockbgoto ClsinputputDisplay of the Loggers Current Memory Values Key Stroke Function User Defined Screen FormatExample Commands to Modify Data Logger FTU to lock up on power onDisplay TimeTime X-07 Direct Commands from FTU-PROMQuit BaudS300 FreeIndirect and Miscellaneous Commands Home Summary of CommandsCLR ALL Recorded Data will be Lost Pdlftu