Canon Model 6401 B manual Hhmm Ddmmyy

Field Test Unit Software

-set up the host computer (run “PDLIO”), baudrate = 8000 baud

-type RUN “LOAD” on the FTU

input	from		Keyboard,		K Input from keyboard
input from			File; or
Create Command file?
Load	logger or				U Specify Unload
Unload		logger
Cassette or Ram file					R Store in RAM
OUTPUT		file ?
Enter OUTPUT file					FILE Program name is FILE,D
name,type
use buffer 7 time?					N No, do not use
unload Format,					F Specify transfer with		a	set	of
Pointers		&	buffer,		block,	location, counts
Buffer	or
Done	?
B,L,C	?				0,50,14 Load program control variables
Format,			F Specify transfer with a			set of
Pointers		&	buffer,	block,	location,	counts
or Done?
B,L,C?					1,0,7 Load Buffer 0 pointers
Format,					F Specify transfer with		a	set	of
Pointers		&	buffer,		block,	location, counts
or Done?
B,L,C?					1,112,7 Load Buffer 7 pointers
Format,					F Specify transfer with		a	set	of
Pointers		&	buffer,		block,	location, counts

or Done?

B,L,C?

Format,

Pointers & buffer, or Done?

1,128,512 Load Logger program.

Note that in this case the last byte of the

log progr. given by PDLASM would be 896.

DFinished

	unload Time	1015 221084 enter current time and date
	Enter Date & Time
	HHMM DDMMYY
?
Section 3. (UN)LOAD,		PLOT& COPY