EnGenius Technologies EAP9550 manual Basic, Radio To enable/disable wireless signal

Page 13

4.2.1.2. Basic

Radio: To enable/disable wireless signal.

∙Mode: Define AP in different modes. When in AP mode, the device works as regular AP, or WDS mode to interlink with other AP devices. You are allowed to set MAC address and encryption algorithm (Please refer to 4.2.1.4 for encryption configuration)

AP

WDS

∙Band: Configure the device into different wireless modes.

2.4 GHz (B)

2.4 GHz (N)

2.4 GHz (B+G)

2.4 GHz (G)

2.4 GHz (B+G+N)

∙Enabled SSID#: The device allows you to add up to 4 unique SSID

∙ESSID#: Description of each configured SSID

Image 13

Contents EnGenius EAP9550 Table of Content Page Introduction Features and BenefitsSystem Requirement Package ContentsUnderstanding the Hardware Hardware InstallationWDS Bridge Access PointUniversal Repeater System Operation ModeStatus Dhcp Schedule Event Log Monitor Detail Click into detail to see historical record 1. AP Status WirelessBasic Radio To enable/disable wireless signalAdvanced Security Encryption DisabledEncryption WEP Encryption WPA pre-shared key Encryption WPA Radius Filter Client List WPSVlan Only Available in AP modeWMM WDS Bridge Status Basic Security Disabled Security WEP Security WPA pre-shared key Advanced WMM Universal Repeater AP Status Basic Advanced Encryption Disabled Encryption WEP Page Encryption WPA pre-shared key Filter WPS WMM Status LAN NetworkPage Management AdminSnmp UPnP Reset ConfigureFirmware Tools Time SettingPower Saving Diagnosis LED Control LogoutFederal Communication Commission Interference Statement Appendix a FCC Interference StatementAppendix B IC Interference Statement