EnGenius Technologies EAP9550 manual Firmware, Configure, Reset

Page 41

4.4.4. Firmware

It allows you to upgrade the firmware of the device in order to improve the functionality and performance.

 Ensure that you have downloaded the appropriate firmware from the

vendor’s website. Connect the device to your PC using an Ethernet cable, as the firmware cannot be upgraded with wireless interface.

4.4.5. Configure

This allows you to restore to factory default setting or backup/restore your current setting.

4.4.6. Reset

This will only reset you devices with current configuration unaffected.

Image 41

Contents EnGenius EAP9550 Table of Content Page Introduction Features and BenefitsSystem Requirement Package ContentsUnderstanding the Hardware Hardware InstallationUniversal Repeater Access PointWDS Bridge Status Operation ModeSystem Dhcp Schedule Event Log Monitor Detail Click into detail to see historical record 1. AP Status WirelessBasic Radio To enable/disable wireless signalAdvanced Security Encryption DisabledEncryption WEP Encryption WPA pre-shared key Encryption WPA Radius Filter Client List WPSVlan Only Available in AP modeWMM WDS Bridge Status Basic Security Disabled Security WEP Security WPA pre-shared key Advanced WMM Universal Repeater AP Status Basic Advanced Encryption Disabled Encryption WEP Page Encryption WPA pre-shared key Filter WPS WMM Status LAN NetworkPage Snmp AdminManagement UPnP Firmware ConfigureReset Tools Time SettingPower Saving Diagnosis LED Control LogoutFederal Communication Commission Interference Statement Appendix a FCC Interference StatementAppendix B IC Interference Statement