EnGenius Technologies EAP9550 manual

Page 38

Dynamic Host Configuration Protocol (DHCP) is a network application protocol used by devices (DHCP clients) to obtain configuration information for operation in an Internet Protocol network. This protocol reduces system administration workload, allowing networks to add devices with little or no manual intervention.

∙DHCP server: Select Disabled or Enabled from drop-down list.

∙Lease Time: From drop-down list user can set follows.

∙Start IP / End IP: Set IP range for DHCP server

∙Domain Name: Allow user to modify Domain Name.

Domain Name System (DNS) servers are used to translate a hostname or a domain name

Image 38

Contents EnGenius EAP9550 Table of Content Page Features and Benefits IntroductionPackage Contents System RequirementHardware Installation Understanding the HardwareUniversal Repeater Access PointWDS Bridge Status Operation ModeSystem Dhcp Schedule Event Log Monitor Detail Click into detail to see historical record Wireless 1. AP StatusRadio To enable/disable wireless signal BasicAdvanced Encryption Disabled SecurityEncryption WEP Encryption WPA pre-shared key Encryption WPA Radius Filter WPS Client ListOnly Available in AP mode VlanWMM WDS Bridge Status Basic Security Disabled Security WEP Security WPA pre-shared key Advanced WMM Universal Repeater AP Status Basic Advanced Encryption Disabled Encryption WEP Page Encryption WPA pre-shared key Filter WPS WMM Network Status LANPage Snmp AdminManagement UPnP Firmware ConfigureReset Time Setting ToolsPower Saving Diagnosis Logout LED ControlAppendix a FCC Interference Statement Federal Communication Commission Interference StatementAppendix B IC Interference Statement