EnGenius Technologies EAP9550 manual Network, Status LAN

Page 37

4.3. Network

4.3.1. Status

4.3.2. LAN

∙Bridge Type: Select Static IP or Dynamic IP from the drop-down list. If you select Static IP, you will be required to specify an IP address and subnet mask. If Dynamic IP is selected, then the IP address is received automatically from the external DHCP server.

∙IP Address: Specify an IP address.

∙IP Subnet Mask: Specify a subnet mask for the IP address.

∙Default Gateway: Specify the IP address of the default gateway, which is assigned by your ISP.

∙802.1d Spanning Tree: Select Enable or Disable from the drop-down list. Enabling spanning tree will avoid redundant data loops.

Image 37

Contents EnGenius EAP9550 Table of Content Page Introduction Features and BenefitsSystem Requirement Package ContentsUnderstanding the Hardware Hardware InstallationWDS Bridge Access PointUniversal Repeater System Operation ModeStatus Dhcp Schedule Event Log Monitor Detail Click into detail to see historical record 1. AP Status WirelessBasic Radio To enable/disable wireless signalAdvanced Security Encryption DisabledEncryption WEP Encryption WPA pre-shared key Encryption WPA Radius Filter Client List WPSVlan Only Available in AP modeWMM WDS Bridge Status Basic Security Disabled Security WEP Security WPA pre-shared key Advanced WMM Universal Repeater AP Status Basic Advanced Encryption Disabled Encryption WEP Page Encryption WPA pre-shared key Filter WPS WMM Status LAN NetworkPage Management AdminSnmp UPnP Reset ConfigureFirmware Tools Time SettingPower Saving Diagnosis LED Control LogoutFederal Communication Commission Interference Statement Appendix a FCC Interference StatementAppendix B IC Interference Statement