EnGenius Technologies EAP9550 manual Management, Admin, Snmp

Page 39

4.4. Management

4.4.1. Admin

Change current login password of the device. It is recommended to change the default password for security reasons.

4.4.2. SNMP

Allows you to assign the contact details, location, community name and trap settings for SNMP. This is a networking management protocol used to monitor network-attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP-compatible devices (called agents) return data stored in their Management Information Bases.

Image 39

Contents EnGenius EAP9550 Table of Content Page Introduction Features and BenefitsSystem Requirement Package ContentsUnderstanding the Hardware Hardware InstallationAccess Point WDS BridgeUniversal Repeater Operation Mode SystemStatus Dhcp Schedule Event Log Monitor Detail Click into detail to see historical record 1. AP Status WirelessBasic Radio To enable/disable wireless signalAdvanced Security Encryption DisabledEncryption WEP Encryption WPA pre-shared key Encryption WPA Radius Filter Client List WPSVlan Only Available in AP modeWMM WDS Bridge Status Basic Security Disabled Security WEP Security WPA pre-shared key Advanced WMM Universal Repeater AP Status Basic Advanced Encryption Disabled Encryption WEP Page Encryption WPA pre-shared key Filter WPS WMM Status LAN NetworkPage Admin ManagementSnmp UPnP Configure ResetFirmware Tools Time SettingPower Saving Diagnosis LED Control LogoutFederal Communication Commission Interference Statement Appendix a FCC Interference StatementAppendix B IC Interference Statement