EnGenius Technologies EAP9550 manual Tools, Time Setting

Page 42

4.5. Tools

4.5.1. Time Setting

This feature allows you to configure, update, and maintain the correct time on the device’s internal system clock as well as configure the time zone. The date and time of the device can be configured manually or by synchronizing with a time server.

If the device losses power for any reason, it will not be able to keep its clock

running, and will not display the correct time once the device has been restarted. Therefore, you must re-enter the correct date and time.

∙Time Zone: Select time zone.

∙NTP Time Server: Specify the NTP server’s IP address for time synchronization.

∙Daylight Saving: To enable daylight savings time.

Image 42

Contents EnGenius EAP9550 Table of Content Page Features and Benefits IntroductionPackage Contents System RequirementHardware Installation Understanding the HardwareAccess Point WDS BridgeUniversal Repeater Operation Mode SystemStatus Dhcp Schedule Event Log Monitor Detail Click into detail to see historical record Wireless 1. AP StatusRadio To enable/disable wireless signal BasicAdvanced Encryption Disabled SecurityEncryption WEP Encryption WPA pre-shared key Encryption WPA Radius Filter WPS Client ListOnly Available in AP mode VlanWMM WDS Bridge Status Basic Security Disabled Security WEP Security WPA pre-shared key Advanced WMM Universal Repeater AP Status Basic Advanced Encryption Disabled Encryption WEP Page Encryption WPA pre-shared key Filter WPS WMM Network Status LANPage Admin ManagementSnmp UPnP Configure ResetFirmware Time Setting ToolsPower Saving Diagnosis Logout LED ControlAppendix a FCC Interference Statement Federal Communication Commission Interference StatementAppendix B IC Interference Statement