EnGenius Technologies EAP9550 manual Security Disabled Security WEP

Page 24

￿2.4 GHz (N)

￿2.4 GHz (B+G)

￿2.4 GHz (G)

￿2.4 GHz (B+G+N)

Channel: You can manually configure a channel to be used.

MAC Address 1~4: To specify MAC address of other AP devices.

MAC address will only shows when configured in WDS mode.

Security: Please refer to 4.2.1.4 for encryption configuration

￿Security: Disabled

￿Security: WEP

Key Length: Select a 64-bit or 128-bit WEP key length from the drop-down list.

Key Format: Select a key type from the drop-down list. 128-bit encryption requires a longer key than 64-bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange -

Image 24
Contents EnGenius EAP9550 Table of Content Page Features and Benefits IntroductionPackage Contents System RequirementHardware Installation Understanding the HardwareAccess Point WDS BridgeUniversal Repeater Operation Mode SystemStatus Dhcp Schedule Event Log Monitor Detail Click into detail to see historical record Wireless 1. AP StatusRadio To enable/disable wireless signal BasicAdvanced Encryption Disabled SecurityEncryption WEP Encryption WPA pre-shared key Encryption WPA Radius Filter WPS Client ListOnly Available in AP mode VlanWMM WDS Bridge Status Basic Security Disabled Security WEP Security WPA pre-shared key Advanced WMM Universal Repeater AP Status Basic Advanced Encryption Disabled Encryption WEP Page Encryption WPA pre-shared key Filter WPS WMM Network Status LANPage Admin ManagementSnmp UPnP Configure ResetFirmware Time Setting ToolsPower Saving Diagnosis Logout LED ControlAppendix a FCC Interference Statement Federal Communication Commission Interference StatementAppendix B IC Interference Statement