Executing Professional Punch A1 Ver.: 04.15
Press <Enter> to run Bootloader or <ESC> if machine is always BUSY New Software is installed
Disconnect cable
Restart Professional Punch
The yellow items are commands typed by the user to run the boot loader. The green items are the responses from the boot loader in the Hyper Terminal window.
Following the steps above, the Hyper Terminal Screen should look like this:
BOOTLOADER>V Pro Punch A1 Ver.: 04.14 BOOTLOADER> Downloading ...
0xF00000
Successful download of Professional Punch A1 Ver.: 04.15
Begin downloading .hex file or enter a command listed below in <>: <G>o execute the new downloaded code or display code <V>ersion
BOOTLOADER>V Professional Punch A1 Ver.: 04.15
BOOTLOADER>G
Executing Professional Punch A1 Ver.: 04.15
Press <Enter> to run Bootloader or <ESC> if machine is always BUSY
The proper settings for the serial port for boot loader communications are:
Port: | COM5 |
BPS | 19200 |
Bits | 8 |
Parity | None |
Stop | 1 |
Flow | XON / XOFF |
33