Samsung SCX-1000 Series Press Enter/Select Left CARTRIDGE? appears, Right CARTRIDGE? appears

Page 15

02-M30UK(2-12 to 2-21) 5/22/00 3:40 PM Page 12

Continued

Installing the Print Cartridge

5 Push back the cartridge until it snaps securely into place. You should hear a click sound.

PUSH

BACK

8

9

Press Enter/Select.

LEFT CARTRIDGE? appears in

the display.

Press ˆ or ¤ to select the colour cartridge type that you installed.

LEFT CARTRIDGE?

NEW STD COLOR

Chapter

6 Close the Printer Top Cover.

The cartridge types you can select are:

NEW STD COLOR for a new standard colour cartridge. NEW HIGH COLOR for a new high-yield colour cartridge. OLD COLOR for a used colour cartridge.

Press Enter/Select.

RIGHT

CARTRIDGE?

RIGHT CARTRIDGE? appears in

NEW

STD BLACK

10 the display.

 

 

 

 

11 Press ˆ or ¤ to select the black/photo cartridge type that you installed.

The cartridge types you can select are:

NEW STD BLACK for a new standard black cartridge. NEW HIGH BLACK for a new high-yield black cartridge. OLD BLACK for a used black cartridge.

NEW PHOTO for a new photo cartridge. OLD PHOTO for a used photo cartridge.

2

7 Press ˆ or ¤ until BOTH appears in the second row of the display.

12 Press Enter/Select.

If you have installed a new cartridge, an alignment test page prints.

Depending on the cartridge combination you have installed in your machine, a test page with one or more alignment patterns similar to the ones shown on next page is printed. Each pattern has a number under it.

PRINTING ■■■

2-12Setting up Your Printer

Setting up Your Printer 2-13

Image 15
Contents 00-M30UKCover 5/22/00 408 PM Safety Precautions Introduction Printing Multipage on a Single Print Media10-10 10-110-2 10-5Overview IntroductionYou can easily scan documents and photographs About This GuideUSB Port Manual Feeder Printer ComponentsMemo Setting Up Your PrinterUser’s Guide CD-ROMs SmarThru 2 Guide Power Cord Parallel CableParallel cable connection Onnecting Printer CableUSB cable connection Connecting the Printer CableLoading Paper into the Input Tray Insert cartridges Press Enter/SelectPress Enter/Select Left CARTRIDGE? appears Right CARTRIDGE? appearsDisplay Like this Cartridge type Part numberTo change the alignment value Has printed, the display looksPrinter software printer driver SmarThru 2 programSamsung SmarThru 2 provides you with Software Requirements Hardware RequirementsTypical recommended Type the mail server address and then click the Next button When you have completed, click FinishFollow the instructions on the screen To uninstall the printer driver, proceed as followsTo uninstall the SmarThru 2 program, proceed as follows CongratulationsClick Copy all disk images Use them instead of the CD-ROM to install the softwareInstalling Software from Diskette Using the Control PanelButton Function Printer. Look for the following buttons and their functionsPrint Media Status MessageAttendance Message When you choose print media, consider the following Media DimensionUse only undamaged paper Not supported paper typesSmoothness and colour of the paper For best print quality, use inkjet paperPrinting Tasks Following procedure describes the general steps required Setting Your Default PrinterDefault printer, follow the procedures as described below Click Printer and select Set as DefaultSelect Start Programs Samsung SCX-1000 Series Using the Status TabUsing the Options Tab Starting the SCX-1000 Series Control ProgramEach property that the printer provides Using the Cartridges Tab1Selectbar. Start Settings Printers from the Windows task This tab allows you to choose cartridge optionsDocument/Quality Tab Paper TabImage Making a CopyAdvanced Tab HalftoneNumber appears on To select the new settingTo cancel a copy in progress press the Stop/Restore button Press ˆ or ¤ until the desiredTo change Copy Resolution To change Copy ContrastTo change Copy Size Either Enter/Select or Stop/RestorePress the Special Copy SCX-1000S only Smart Media FunctionCard care and Storage Press Enter/Select when SDC50002.JPG appearsInserting and Removing Cards Selecting the file stored on the Smart Media CardPress ˆ or ¤ to select the print mode You can print images captured on digital camerasImages and make copies without a direct link to a PC To delete a image file from the Smart Media card Changing Printer Setting Paper Type appears Maintaining Your Printer Page, complete the following steps To install the print cartridgeTo remove the print cartridge Alignment test page. If you need to print an alignment testTo wipe the printheads To clean the printheadsTo clean the Scanner Bed Clean the printheadsPrinter prints the Help list Not satisfactoryRemove the print cartridge from the printer If you need help, see ‘To Remove the Print Cartridge’ onTo restore factory defaults TroubleshootingLift the Output Tray Paper jams while the printer is feedingPaper jams while printing Pull the Input Tray completely out of the printerTips for Avoiding Paper Jams Smart Media messages Stop/Restore buttonPress the Enter/Select Selecting the Default Printer Change the Print Quality to High or Normal When the current job is completed, try again Mode because a lot of memory is required toComputer to ECP mode through Bios setting. It How to set BIOS, refer to the document of yourAnyPage Lite does not offer the scan feature Brightness or too low resolution. AdjustAccuracy. Do not forget to set the switch back to Printer in draft modePecifications SpecificationPrinter Stafford Park 12, Telford Shropshire TF3 3BJ Replacing the Fitted PlugIndex Twain UI