Samsung SCX-1000 Series manual Either Enter/Select or, Stop/Restore

Page 36
Repeat steps 5 and 6 to copy the remaining pages into the memory.
7
PAGE 1
94%
COPY TO MEMORY
Press the Black button.
4
5 Lift the Printer Top Cover, and then place your first page face down on the Scanner Bed and close the Printer Top Cover.
6 Press the Enter/Select button. The printer copies the document into the memory.
For example, if you have a three-page job to print and want two copies:
When the Enter/Select button is pressed, the printer prints page 3, page 2, page 1, page 3, page 2, page 1.
When the Stop/Restore button is pressed, the printer prints page 1, page 2, page 3, page 1, page 2, page 3.

06-M30UK(5-10 to 6-9) 5/22/00 3:24 PM Page 6

Chapter 6

Collated Copying

 

The SCX-1000 Series printer has a collated copying function to sort

 

copies.

Chapter 6

Making a Clone Copy

 

Use the CLONE setting to print multi-same image on a single page.

 

For example, 4 IMAGES means four same images are printed on one page.

The copy will be produced as below when collated.

 

Press the Special Copy button

[MONO COLLATE]

 

until MONO COLLATE appears

 

 

 

1 in the first row of the display.

DOCUMENT

NO (01)

 

 

2 Press ˆ or ¤ to enter the number of pages to scan.

3

Choose print order by pressing

 

 

PRINT REV

ORDER?

either Enter/Select or

Y:ENTER

N:STOP

Stop/Restore.

 

 

 

1 Place your original face down on the Scanner Bed with the top left of the original to the green mark ( ), and close the Printer Top Cover.

2

Press the Special Copy button

[CLONE]

until CLONE appears.

¤ 4 IMAGES

 

 

Press ˆ or ¤ to select the clone number.

 

 

 

3 You may choose 4 IMAGES, 9 IMAGES, 16 IMAGES or AUTO 100%.

4

Press the Enter/Select button.

 

 

 

 

CLONE

COPY

READY

 

 

 

 

PRESS

START

COPY

 

 

Start copying by doing one of the

 

 

 

 

 

COPYING

■■■

 

5 following:

 

P A G E

0 1

 

 

 

Press the Black button to make

 

 

 

 

 

 

 

 

 

 

black and white copies.

 

 

 

 

Chapter 6

This feature only allows you to print a document in black and white. You cannot select high quality printing.

Press the Color button to make

colour copies.

6-6Making a Copy

Making a Copy 6-7

Image 36
Contents 00-M30UKCover 5/22/00 408 PM Safety Precautions Introduction Print Media Printing Multipage on a Single10-1 10-210-5 10-10Introduction OverviewAbout This Guide You can easily scan documents and photographsPrinter Components USB Port Manual FeederSetting Up Your Printer MemoPower Cord Parallel Cable User’s Guide CD-ROMs SmarThru 2 GuideOnnecting Printer Cable Parallel cable connectionConnecting the Printer Cable USB cable connectionLoading Paper into the Input Tray Press Enter/Select Insert cartridgesPress Enter/Select Left CARTRIDGE? appears Right CARTRIDGE? appearsDisplay Cartridge type Part number To change the alignment valueHas printed, the display looks Like thisPrinter software printer driver SmarThru 2 programSamsung SmarThru 2 provides you with Hardware Requirements Software RequirementsTypical recommended When you have completed, click Finish Type the mail server address and then click the Next buttonTo uninstall the printer driver, proceed as follows To uninstall the SmarThru 2 program, proceed as followsCongratulations Follow the instructions on the screenUse them instead of the CD-ROM to install the software Click Copy all disk imagesUsing the Control Panel Installing Software from DiskettePrinter. Look for the following buttons and their functions Button FunctionPrint Media Status MessageAttendance Message Media Dimension When you choose print media, consider the followingNot supported paper types Smoothness and colour of the paperFor best print quality, use inkjet paper Use only undamaged paperPrinting Tasks Setting Your Default Printer Default printer, follow the procedures as described belowClick Printer and select Set as Default Following procedure describes the general steps requiredUsing the Status Tab Using the Options TabStarting the SCX-1000 Series Control Program Select Start Programs Samsung SCX-1000 SeriesUsing the Cartridges Tab 1Selectbar. Start Settings Printers from the Windows taskThis tab allows you to choose cartridge options Each property that the printer providesPaper Tab Document/Quality TabMaking a Copy Advanced TabHalftone ImageTo select the new setting To cancel a copy in progress press the Stop/Restore buttonPress ˆ or ¤ until the desired Number appears onTo change Copy Resolution To change Copy ContrastTo change Copy Size Stop/Restore Either Enter/Select orPress the Special Copy Smart Media Function SCX-1000S onlyPress Enter/Select when SDC50002.JPG appears Inserting and Removing CardsSelecting the file stored on the Smart Media Card Card care and StoragePress ˆ or ¤ to select the print mode You can print images captured on digital camerasImages and make copies without a direct link to a PC To delete a image file from the Smart Media card Changing Printer Setting Paper Type appears Maintaining Your Printer To install the print cartridge To remove the print cartridgeAlignment test page. If you need to print an alignment test Page, complete the following stepsTo clean the printheads To clean the Scanner BedClean the printheads To wipe the printheadsNot satisfactory Remove the print cartridge from the printerIf you need help, see ‘To Remove the Print Cartridge’ on Printer prints the Help listTroubleshooting To restore factory defaultsPaper jams while the printer is feeding Paper jams while printingPull the Input Tray completely out of the printer Lift the Output TrayTips for Avoiding Paper Jams Stop/Restore button Smart Media messagesPress the Enter/Select Selecting the Default Printer Change the Print Quality to High or Normal Mode because a lot of memory is required to Computer to ECP mode through Bios setting. ItHow to set BIOS, refer to the document of your When the current job is completed, try againBrightness or too low resolution. Adjust Accuracy. Do not forget to set the switch back toPrinter in draft mode AnyPage Lite does not offer the scan featureSpecification PecificationsPrinter Replacing the Fitted Plug Stafford Park 12, Telford Shropshire TF3 3BJIndex Twain UI