Samsung SCX-1000 Series manual Printer software printer driver, SmarThru 2 program

Page 17

02-M30UK(2-12 to 2-21) 5/22/00 3:41 PM Page 16

Chapter 2

Testing the Printer

Each time you install a new print cartridge, run the Self Test to check if the print cartridge is installed properly.

Chapter 2	Installing the Printer Software
	The printer software (printer driver) and the SmarThru 2 program
	are provided on two CD-ROMs. To use your new machine as a
	printer, the printer software must be installed. In addition, it is
	recommended to install SmarThru 2 program to take more
	features than the stand-alone printer.

1 Press Setup until MAINTENANCE appears in the display.

2 Press ˆ or ¤ until PRINT SELF TEST appears in the second row of the display.

[MAINTENANCE] ¤ HELP LIST

[MAINTENANCE] ¤ PRINT S E LF TEST

Printer software (printer driver)

The printer driver accesses the printer features and allows

the computer to communicate with the printer.

SmarThru 2 program

The program called SmarThru 2 is an application program that helps

you manage your printer.

Samsung SmarThru 2 provides you with :

● A Mail Box that can send, receive and store e-mail and fax

Chapter 2

3 The message PRINTING appears in the display.

Press Enter/Select.

PRINTING ■■■

messages.

● An Image Manager that supports operations on images.

● Scan Manager that supports scanner operations.

● A Copy Manager that controls the copying process.

● AnyPage Lite OCR software gives you the possibility to convert

scanned images into text documents suitable for editing in your

favorite text editor.

● Smart Media Manager that can store, delete and edit scanned

For information about SmarThru 2, see the separate

SmarThru 2 Guide.

2-16Setting up Your Printer

Setting up Your Printer 2-17

Image 17

Contents 00-M30UKCover 5/22/00 408 PM Safety Precautions Introduction Printing Multipage on a Single Print Media10-2 10-110-5 10-10Overview IntroductionYou can easily scan documents and photographs About This GuideUSB Port Manual Feeder Printer ComponentsMemo Setting Up Your PrinterUser’s Guide CD-ROMs SmarThru 2 Guide Power Cord Parallel CableParallel cable connection Onnecting Printer CableUSB cable connection Connecting the Printer CableLoading Paper into the Input Tray Insert cartridges Press Enter/SelectDisplay Press Enter/Select Left CARTRIDGE? appearsRight CARTRIDGE? appears To change the alignment value Cartridge type Part numberHas printed, the display looks Like thisSamsung SmarThru 2 provides you with Printer software printer driverSmarThru 2 program Software Requirements Hardware RequirementsTypical recommended Type the mail server address and then click the Next button When you have completed, click FinishTo uninstall the SmarThru 2 program, proceed as follows To uninstall the printer driver, proceed as followsCongratulations Follow the instructions on the screenClick Copy all disk images Use them instead of the CD-ROM to install the softwareInstalling Software from Diskette Using the Control PanelButton Function Printer. Look for the following buttons and their functionsAttendance Message Print MediaStatus Message When you choose print media, consider the following Media DimensionSmoothness and colour of the paper Not supported paper typesFor best print quality, use inkjet paper Use only undamaged paperPrinting Tasks Default printer, follow the procedures as described below Setting Your Default PrinterClick Printer and select Set as Default Following procedure describes the general steps requiredUsing the Options Tab Using the Status TabStarting the SCX-1000 Series Control Program Select Start Programs Samsung SCX-1000 Series1Selectbar. Start Settings Printers from the Windows task Using the Cartridges TabThis tab allows you to choose cartridge options Each property that the printer providesDocument/Quality Tab Paper TabAdvanced Tab Making a CopyHalftone ImageTo cancel a copy in progress press the Stop/Restore button To select the new settingPress ˆ or ¤ until the desired Number appears onTo change Copy Size To change Copy ResolutionTo change Copy Contrast Either Enter/Select or Stop/RestorePress the Special Copy SCX-1000S only Smart Media FunctionInserting and Removing Cards Press Enter/Select when SDC50002.JPG appearsSelecting the file stored on the Smart Media Card Card care and StorageImages and make copies without a direct link to a PC Press ˆ or ¤ to select the print modeYou can print images captured on digital cameras To delete a image file from the Smart Media card Changing Printer Setting Paper Type appears Maintaining Your Printer To remove the print cartridge To install the print cartridgeAlignment test page. If you need to print an alignment test Page, complete the following stepsTo clean the Scanner Bed To clean the printheadsClean the printheads To wipe the printheadsRemove the print cartridge from the printer Not satisfactoryIf you need help, see ‘To Remove the Print Cartridge’ on Printer prints the Help listTo restore factory defaults TroubleshootingPaper jams while printing Paper jams while the printer is feedingPull the Input Tray completely out of the printer Lift the Output TrayTips for Avoiding Paper Jams Smart Media messages Stop/Restore buttonPress the Enter/Select Selecting the Default Printer Change the Print Quality to High or Normal Computer to ECP mode through Bios setting. It Mode because a lot of memory is required toHow to set BIOS, refer to the document of your When the current job is completed, try againAccuracy. Do not forget to set the switch back to Brightness or too low resolution. AdjustPrinter in draft mode AnyPage Lite does not offer the scan featurePecifications SpecificationPrinter Stafford Park 12, Telford Shropshire TF3 3BJ Replacing the Fitted PlugIndex Twain UI