Mitsubishi Electronics PD-5030, PD-6130 Format Sizes, When viewing videos or digital video discs

Page 22

Format Sizes

Format Operation (manual)

With this function, you can select one of six screen sizes.

When viewing videos or digital video discs

1.Press the FORMAT button on the remote control.

2.Within 3 seconds ...

Press the FORMAT button again. The screen size switches as follows:

→ NARROW → STANDARD → STRETCH → EXPAND → ZOOM → 14:9

When a 720P or 1080I signal is input:

STANDARD ↔ ZOOM

NARROW screen size (4:3)

The NARROW screen size is displayed.

*The picture has the same size as video pictures with a 4 : 3 aspect ratio.

STANDARD screen size

The image is expanded in the horizontal direction.

*Images compressed in the horizontal direction (“squeezed images”) are expanded in the horizontal direction and displayed on the entire screen with correct linearity. (Normal images are expanded in the horizontal direction.)

STRETCH screen size

The picture is expanded in the horizontal and vertical directions at different ratios.

*Use this for watching normal video programs (4:3) with a wide screen.

EXPAND screen size

The picture is expanded in the horizontal and vertical direction, maintaining the original proportions.

* Use this for theater size (wide) movies, etc.

ZOOM screen size

Original image Information is lost on both sides.

The squeezed film image is expanded to fill the entire screen at a ratio of 2.35:1. Black bands do not appear at the top and bottom but information is lost on the left and right margins.

•This feature is available when the input signal is video, component (480I, 480P, 576I, 576P, 720P, 1080I) or RGB (525P or 625P signal from a scan converter).

*If black bands appear on the top and bottom in the full screen size, select the 2.35:1 size screen to avoid phosphor burn-in.

14:9 screen size

The image is displayed at a 14:9 aspect ratio.

*This feature is available when the input signal is video, component (480I, 480P, 576I, 576P) or RGB (525P or 625P signal from a scan converter).

WARNING

DO NOT OPERATETHE PLASMA DISPLAY IN NARROW (4:3) SCREEN SIZE MODE OR 14:9 SCREEN SIZE MODE FOR AN EXTENDED PERIOD. THE SIDE BARS CAN CAUSE PHOSPHOR BURN-IN.

13

Image 22

Contents Owner’s Guide Page Important Safety Instructions PD-5030/PD-6130 Important Information PrecautionsRisk of Electric Shock Do not Open To avoid damage and prolong operating life Page Plasma Display Screen & Cabinet Cleaning SafeguardsImportant No Abrasives Introduction Features you’ll enjoy includeContents of the Package Introduction to the PD-5030/ PD-6130 Plasma MonitorsContents How to Attach Options to the Plasma Monitor Ventilation requirements for enclosure mountingPart Names and Function Front ViewRear View/ Terminal Board EXT Speaker L and RRemote Control RGB/PCBattery Installation and Replacement 5AUTO PositionOperating Range Using the wired remote control modeHandling the remote control Approx 7m/23ftMitsubishi HD Receiver/Controller InstallationHD-5000 Connecting Your VCR or Laser Disc Player Connecting Your DVD PlayerMonitorLink and MonitorLink Control MonitorLink Pin Configuration DVI ConnectorMonitorLink Connections External DVI Device with DVI-HDCPCable Management Video signal RGB/DVD/HD signalLoop Out ClampTo check the settings To adjust the sound volumeTo cancel the sound To adjust the size or quality of the picture automaticallyAfter the power is turned off with the off timer To set the off timerTo cancel the off timer To check the remaining timeWhen viewing videos or digital video discs Format SizesNarrow screen size 43 or Sxga Format Operation with Computer Signals Supported resolution Expand screen sizeOn-Screen Menu OSM Controls Menu OperationsVideo Settings Menu Adjusting the pictureAdjusting the color to the desired level Setting the color temperatureReducing noise in the picture Gamma settings Making the Low Tone adjustments Adjusting the white balance LOW Tone settings Audio settings menu Audio Settings Menu Colorview settings ColorViewAdjusting the Position, Size, Fine Picture, Picture Adj Monitor Settings MenuSetting the allocation of the audio connectors Example Setting Audio INPUT1 to VideoOption1 Settings Menu Setting the on-screen menuExample Set the BNC Input mode to Comp Setting the BNC connectorsSetting a computer image to the correct RGB select screen BNC Input Settings Input Skip settings Setting high definition images to the suitable screen sizeSetting the Input Skip RGB Select modesResetting to the default values Option2 Settings MenuSetting the power management for computer images Peak Bright settings POWER/STANDBY indicatorSetting the picture to suit the movie Reducing burn-in of the screenOrbiter settings Orbiter Function settingsSetting the time Inverse SettingsSetting the time for INVERSE/WHITE ExampleGray Level settings Setting the screen size for S1/S2 video inputSoft Focus settings Soft FocusPLUG/PLAY settings Setting the signal and black level for DVI signalS1/S2 settings Black Level settings Present Time settings Option3 Settings MenuUsing the timer Present Time To reset the program Setting the power on mode Program Timer settings Special characters in the Program Timer screen Button Lock settings Enabling/disabling remote control wireless transmission PWR. on Mode settings IR Remote settingsTo set the Loop OUT to on Loop Out setting Loop OUT settings To connect another displaySetting the language for the menus Language Settings MenuColor System Settings Menu Setting the video signal formatConnections RS-232C ControlApplication Communication ParametersTroubleshooting Symptom Checks RemedyPage Specifications PD-5030 SignalsSpecifications PD-6130 Supported resolution Table of Signals SupportedComputer input signals supported by this system Page Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity