Mitsubishi Electronics PD-5030 manual Specifications PD-6130

Page 48

Specifications: PD-6130

Screen Size

53.2"(H)×29.9"(V) inches

 

 

1351(H)×760(V) mm

 

 

diagonal 61"

 

 

 

Aspect Ratio

16 : 9

Resolution

1365(H)×768(V) pixels

Pixel Pitch

0.039"(H)×0.039"(V) inches

 

 

0.99(H)×0.99(V) mm

 

 

 

Color Reproduction

256 levels, 16,770,000 colors

Signals

 

 

Synchronization Range

Horizontal : 15.5 to 110 kHz

 

 

(automatic : step scan)

 

 

Vertical : 50.0 to 120 Hz

 

 

(automatic : step scan)

 

 

 

 

Input Signals

RGB, NTSC (3.58/4.43), PAL (B,G,M,N),

 

 

PAL60, SECAM, HD*1 , DVD*1 , DTV*1

Input Terminals (VIDEO1 and RGB1 can also be used as OUTPUT terminals)

 

RGB

 

 

Visual 1 (Analog)

mini D-sub 15-pin×1

 

Visual 2 (Analog)

BNC (R, G, B, H/CS, V)×1*2

 

Visual 3 (Digital)

DVI-D 24-pin×1

 

 

 

 

Video

 

 

Visual 1

BNC×1

 

Visual 2

RCA-pin×1

 

Visual 3

S-Video: DIN 4-pin×1

 

DVD/HD/DTV

 

 

Visual 1

RCA-pin (Y, PB[CB], PR[CR])×1*1

 

Visual 2

BNC (Y, PB[CB], PR[CR])×1*1, *2

 

Audio

Stereo RCA×3 (Selectable)

 

RS-232C Control

D-sub 9-pin×1 (RS-232C)

Sound output

9W+9W at 6 ohm

Power Supply

AC120V 50/60Hz

Current Rating

6.7A (maximum)

Power Consumption

540W (typical)

Dimensions

57.9 (W)×34.7 (H)×4.8 (D) inches

 

 

1470 (W)×880 (H)×122(D) mm

 

 

Weight

136.9 lbs / 62.2 kg (without stand)

Environmental Considerations

 

 

Operating Temperature

0°C to 40°C / 32°F to 104°F

 

Humidity

20 to 80% (no condensation)

 

Altitude

0 to 9180 feet / 0 to 2800 m

 

Storage Temperature

-10°C to 50°C / 14°F to 122°F

 

Humidity

10 to 90% (no condensation)

 

Altitude

0 to 9840 feet / 0 to 3000 m

Front Panel User Controls

Power on/off, Input source select,

 

 

Volume up/down/ Menu control

Remote Control Functions

Power on/off, Input source select, Menu

 

 

control,Volume up/down, Adjust (Up,

 

 

Down, Left, Right), Pointer, Zoom up/

 

 

down, Sleep, Wireless/ Wired remote

 

 

control

OSM Functions Picture (Contrast/Brightness/Sharpness/ Color/Tint/ Picture mode/Noise reduction/Color temperature/ White balance/Gamma/Low tone/Color View), Audio (Bass/Treble/Balance/Audio input), Image Adjust (Aspect mode/V-Position /H-Position/V-Height /H- Width/Auto Picture/Fine picture/Picture adjustment), Option1 (Menu/BNC Input/RGB Select/HD Select/ Input Skip/All Reset), Option2 (Power management/ Film mode/Long life [Peak Bright, Orbiter, Inverse, White, Soft focus]/Gray level/S1/S2/Picture size/DVI Set up), Option3 (Timer Power on mode/Button lock/ IR Remote/Loop out, Language*, Color system, Source information

*English, German, French, Italian, Spanish, Swedish, Chinese

 

1.9"

2.9"

57.9" (1470)

(48)

 

 

(74)

53.2" (1351)

 

 

29.9" (760)

34.7" (880)

 

 

 

4.8"

 

 

(122)

 

Units are in inch

 

 

(mm)

The features and specifications may be subject to change without notice.

*1 HD/DVD/DTV input signals supported on this system

480P (60 Hz)

480I (60 Hz)

525P (60 Hz)

525I (60 Hz)

576P (50 Hz)

576I (50 Hz)

625P (50 Hz)

625I (50 Hz)

720P (60 Hz)

1035I (60 Hz)

1080I (50 Hz)

1080I (60 Hz)

*2 The 5-BNC connectors are used as RGB/PC2 and HD/DVD2 input. Select one of them under “BNC INPUT”.

Supported Signals

•640×480P @ 59.94/60Hz

•1280×720P @ 59.94/60Hz

•1920×1080I @ 59.94/60Hz

•720×480P @ 59.94/60Hz

•720×480I @ 59.94/60Hz

Note: In some cases a signal on the plasma monitor may not be displayed properly. The proglem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc...). If you do experience such a problem please contact Mitsubishi Digital Electronics, Inc. and also the manufacturer of the source equipment.

Other Features Motion compensated 3D Scan Converter (NTSC, PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3 pull down Converter (NTSC, 480I, 525I, 1035I, 1080I (60Hz)), 2-2 pull down Converter (PAL, 576I, 625I, NTSC, 480I, 525I), Digital Zoom Function (100-900% Selectable), Self Diagnosis, Anti Image Burn (Peak Bright Lock 1-3, Inverse, White, Orbiter (Auto1,2/Manual), Color Temperature select (high/medium/mid low/low, user has 4 memories), Button lock (Except power SW), Auto Picture, Input Skip, ColorView, Low Tone (3 mode), Programmable Timer, Gamma Correction (4 mode), Loop through interface, Plug and play (DDC1, DDC2b, RGB3: DDC2b only)

Accessories Remote control with two AAA batteries, Power cord, Owner’s guide, Safety metal fitting parts, Ferrite cores, Bands, Cable clamps, RGB cable, Remote cable, Registration card

Regulations UL Approved (UL 60950 and UL65000/CSA C22.2 No.60950-00/ CAN/CSA-E60065-00) DOC Canada requirements

Meets FCC Class B requirements

39

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Owner’s Guide Page Important Safety Instructions PD-5030/PD-6130 Precautions Important InformationRisk of Electric Shock Do not Open To avoid damage and prolong operating life Page Cleaning Safeguards Plasma Display Screen & CabinetImportant No Abrasives Features you’ll enjoy include Contents of the PackageIntroduction Introduction to the PD-5030/ PD-6130 Plasma MonitorsContents How to Attach Options to the Plasma Monitor Ventilation requirements for enclosure mountingPart Names and Function Front ViewRear View/ Terminal Board EXT Speaker L and RRemote Control RGB/PCBattery Installation and Replacement 5AUTO PositionUsing the wired remote control mode Handling the remote controlOperating Range Approx 7m/23ftInstallation Mitsubishi HD Receiver/ControllerHD-5000 Connecting Your VCR or Laser Disc Player Connecting Your DVD PlayerMonitorLink Pin Configuration DVI Connector MonitorLink ConnectionsMonitorLink and MonitorLink Control External DVI Device with DVI-HDCPVideo signal RGB/DVD/HD signal Loop OutCable Management ClampTo adjust the sound volume To cancel the soundTo check the settings To adjust the size or quality of the picture automaticallyTo set the off timer To cancel the off timerAfter the power is turned off with the off timer To check the remaining timeWhen viewing videos or digital video discs Format SizesFormat Operation with Computer Signals  Supported resolutionNarrow screen size 43 or Sxga Expand screen sizeOn-Screen Menu OSM Controls Menu OperationsVideo Settings Menu Adjusting the pictureSetting the color temperature Adjusting the color to the desired levelReducing noise in the picture Making the Low Tone adjustments  Adjusting the white balance Gamma settings  LOW Tone settingsAudio Settings Menu  Colorview settings Audio settings menu ColorViewMonitor Settings Menu Setting the allocation of the audio connectorsAdjusting the Position, Size, Fine Picture, Picture Adj Example Setting Audio INPUT1 to VideoOption1 Settings Menu Setting the on-screen menuSetting the BNC connectors Setting a computer image to the correct RGB select screenExample Set the BNC Input mode to Comp  BNC Input SettingsSetting high definition images to the suitable screen size Setting the Input Skip Input Skip settings  RGB Select modesOption2 Settings Menu Resetting to the default valuesSetting the power management for computer images POWER/STANDBY indicator Setting the picture to suit the moviePeak Bright settings Reducing burn-in of the screenOrbiter settings Orbiter Function settingsInverse Settings Setting the time for INVERSE/WHITESetting the time ExampleSetting the screen size for S1/S2 video input Soft Focus settingsGray Level settings Soft FocusSetting the signal and black level for DVI signal S1/S2 settingsPLUG/PLAY settings Black Level settingsOption3 Settings Menu Using the timer Present Time settings Present TimeSetting the power on mode  Program Timer settings To reset the program  Special characters in the Program Timer screenEnabling/disabling remote control wireless transmission  PWR. on Mode settings Button Lock settings  IR Remote settingsLoop Out setting  Loop OUT settingsTo set the Loop OUT to on  To connect another displayLanguage Settings Menu Color System Settings MenuSetting the language for the menus Setting the video signal formatRS-232C Control ApplicationConnections Communication ParametersTroubleshooting Symptom Checks RemedyPage Specifications PD-5030 SignalsSpecifications PD-6130 Table of Signals Supported Supported resolutionComputer input signals supported by this system Page Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity
Top Page Image Contents