Mitsubishi Electronics PD-5030 Setting the signal and black level for DVI signal, S1/S2 settings

Page 38

PC ↔ STB/DVD LOW ↔ HIGH

Information

⬛S1/S2 settings

AUTO .....Adjusts the screen size automatically

according to the S1/S2 video signal. OFF ....... Turns the S1/S2 function off.

⬛Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Setting the signal and black level for DVI signal

Choose the signal for the DVI connector (PC or STB/ DVD) and set the black level.

Example: Setting the “PLUG/PLAY” mode to “STB/ DVD”

1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.

The “OPTION2” screen appears.

2.Use the ▲ and ▼ buttons to select “DVI SET UP”, then press the MENU/ENTER button.

The “DVI SET UP” screen appears.

3.To set PLUG/PLAY mode to “STB/DVD”...

Use the ◀ and ▶ buttons to select “STB/DVD”.

The mode switches as follows each time the ◀ or ▶ button is pressed:

PLUG/PLAY:

BLACK LEVEL:

		DVI SET UP
PLUG/PLAY		:	STB/DVD
BLACK LEVEL		:	HIGH

SEL.

ADJ.

EXIT

RETURN

Information

⬛PLUG/PLAY settings

PC	When connected to the PC signal.
STB/DVD ....	When connected to the SET TOP BOX,
	DVD etc.

⬛BLACK LEVEL settings

LOW ........... When connected to the PC signal.

HIGH .......... When connected to the SET TOP BOX,

DVD etc. Change “HIGH” into “LOW” if the black level appears gray.

29

Image 38

Contents Owner’s Guide Page Important Safety Instructions PD-5030/PD-6130 Risk of Electric Shock Do not Open PrecautionsImportant Information To avoid damage and prolong operating life Page Important No Abrasives Cleaning SafeguardsPlasma Display Screen & Cabinet Introduction Features you’ll enjoy includeContents of the Package Introduction to the PD-5030/ PD-6130 Plasma MonitorsContents How to Attach Options to the Plasma Monitor Ventilation requirements for enclosure mountingPart Names and Function Front ViewRear View/ Terminal Board EXT Speaker L and RRemote Control RGB/PCBattery Installation and Replacement 5AUTO PositionOperating Range Using the wired remote control modeHandling the remote control Approx 7m/23ftHD-5000 InstallationMitsubishi HD Receiver/Controller Connecting Your VCR or Laser Disc Player Connecting Your DVD PlayerMonitorLink and MonitorLink Control MonitorLink Pin Configuration DVI ConnectorMonitorLink Connections External DVI Device with DVI-HDCPCable Management Video signal RGB/DVD/HD signalLoop Out ClampTo check the settings To adjust the sound volumeTo cancel the sound To adjust the size or quality of the picture automaticallyAfter the power is turned off with the off timer To set the off timerTo cancel the off timer To check the remaining timeWhen viewing videos or digital video discs Format SizesNarrow screen size 43 or Sxga Format Operation with Computer Signals Supported resolution Expand screen sizeOn-Screen Menu OSM Controls Menu OperationsVideo Settings Menu Adjusting the pictureReducing noise in the picture Setting the color temperatureAdjusting the color to the desired level Gamma settings Making the Low Tone adjustments Adjusting the white balance LOW Tone settings Audio settings menu Audio Settings Menu Colorview settings ColorViewAdjusting the Position, Size, Fine Picture, Picture Adj Monitor Settings MenuSetting the allocation of the audio connectors Example Setting Audio INPUT1 to VideoOption1 Settings Menu Setting the on-screen menuExample Set the BNC Input mode to Comp Setting the BNC connectorsSetting a computer image to the correct RGB select screen BNC Input Settings Input Skip settings Setting high definition images to the suitable screen sizeSetting the Input Skip RGB Select modesSetting the power management for computer images Option2 Settings MenuResetting to the default values Peak Bright settings POWER/STANDBY indicatorSetting the picture to suit the movie Reducing burn-in of the screenOrbiter settings Orbiter Function settingsSetting the time Inverse SettingsSetting the time for INVERSE/WHITE ExampleGray Level settings Setting the screen size for S1/S2 video inputSoft Focus settings Soft FocusPLUG/PLAY settings Setting the signal and black level for DVI signalS1/S2 settings Black Level settings Present Time settings Option3 Settings MenuUsing the timer Present Time To reset the program Setting the power on mode Program Timer settings Special characters in the Program Timer screen Button Lock settings Enabling/disabling remote control wireless transmission PWR. on Mode settings IR Remote settingsTo set the Loop OUT to on Loop Out setting Loop OUT settings To connect another displaySetting the language for the menus Language Settings MenuColor System Settings Menu Setting the video signal formatConnections RS-232C ControlApplication Communication ParametersTroubleshooting Symptom Checks RemedyPage Specifications PD-5030 SignalsSpecifications PD-6130 Computer input signals supported by this system Table of Signals SupportedSupported resolution Page Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity