Mitsubishi Electronics PD-6130 manual Monitor Settings Menu, Example Setting Audio INPUT1 to Video

Setting the allocation of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired input.

Example: Setting “AUDIO INPUT1” to “VIDEO 2”

1.On the MAIN MENU, select “AUDIO SETTINGS”, then press the MENU/ENTER button.

The “AUDIO SETTINGS” screen appears.

2.Use the ▲ and ▼ buttons to select “AUDIO INPUT1”.

3.To set the AUDIO INPUT1 to “VIDEO2”...

Use the
and  buttons to select “VIDEO2”.

The mode switches as follows each time the
or  button is pressed:

The available sources depend on the setting of “BNC INPUT”.

RGB: → VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1← →MONLINK ↔RGB2 ↔RGB1 ←

COMP.: → VIDEO1 ↔ VIDEO2 ↔ VIDEO3↔ HD/DVD1←

→MONLINK ↔RGB1 ↔HD/DVD2 ←

AUDIO SETTINGS

BASS
TREBLE
BALANCE
		:	VIDEO2
AUDIO INPUT1
AUDIO INPUT2		:	HD/DVD1
AUDIO INPUT3		:	RGB1
SEL.	ADJ.			RETURN
			EXIT

Information

AUDIO INPUT

A single audio input cannot be selected as the audio channel for more than one input terminal.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Monitor Settings Menu

Adjusting the Position, Size, Fine Picture, Picture Adj

The position of the image can be adjusted and flickering of the image can be corrected.

Example: Adjusting the vertical position in the NARROW mode

1.On the MAIN MENU, select “MONITOR SETTINGS”, then press the MENU/ENTER button.

The “MONITOR SETTINGS” menu appears.

(only for RGB/PC setting)

MONITOR SETTINGS

ASPECT MODE		:	NARROW
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE		:	OFF
FINE PICTURE
PICTURE ADJ.
SEL.	ADJ.			RETURN
			EXIT

*The settings on the MONITOR SETTINGS menu are not preset at the factory.

To select a mode ...

Use the
and  buttons to select a mode.

The mode switches as follows each time the
or  button is pressed:

NARROW ↔ STANDARD

*The mode can also be switched by pressing the FORMAT button on the remote control.

2.To adjust the vertical position ...

Use the ▲ and ▼ buttons to select “V-POSITION”.

MONITOR SETTINGS

ASPECT MODE		:	NARROW
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE		:	OFF
FINE PICTURE
PICTURE ADJ.
SEL.	ADJ.			RETURN
			EXIT

3. Adjust using the
and  buttons.

V-POSITION

*If neither the
or  button is pressed within 5 seconds, the current setting is stored into memory and the previous screen reappears.

To continue making other computer image

adjustments ...

Repeat from step 2.

20