Mitsubishi Electronics PD-6130 Setting the BNC connectors, Example Set the BNC Input mode to Comp

Setting the BNC connectors

Select whether to set the input of the 5 BNC connectors to RGB or component.

Example: Set the BNC INPUT mode to “COMP.”

1.On the MAIN MENU, select “OPTION1”, then press the MENU/ENTER button.

The “OPTION1” screen appears.

2.Use the ▲ and ▼ buttons to select “BNC INPUT”.

3.To set the BNC INPUT mode to “COMP.”...

Use the
and  buttons to select “COMP.”.

The mode switches as follows each time the
or  button is pressed:

RGB ↔ COMP.

			OPTION1		1 / 3
MENU
	BNC INPUT			:	COMP.
RGB SELECT				:	AUTO
HD SELECT				:	1080B
INPUT SKIP				:	OFF
ALL RESET				:	OFF
		NEXT PAGE
		SEL.	ADJ.		EXIT	RETURN

Information

BNC INPUT Settings

RGB .........Use the 5BNC terminals for RGB input.

COMP. ...... Use the 3BNC terminals for component

input.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Setting a computer image to the correct RGB select screen

Example: Setting the “RGB SELECT” mode to “MOTION ”

1.On the MAIN MENU, select “OPTION1”, then press the MENU/ENTER button.

The “OPTION1” screen appears.

2.Use the ▲ and ▼ buttons to select “RGB SELECT”.

3.To set the RGB select mode to “MOTION” ...

Use the
and  buttons to select “MOTION”.

The mode switches as follows each time the
or  button is pressed:

→ AUTO ↔ STILL ↔ MOTION ↔ WIDE1 ↔ WIDE2 ↔ DTV ←

			OPTION1		1 / 3
MENU
BNC INPUT				:	RGB
	RGB SELECT			:	MOTION
HD SELECT				:	1080B
INPUT SKIP				:	OFF
ALL RESET				:	OFF
		NEXT PAGE
		SEL.	ADJ.		EXIT	RETURN

22