Mitsubishi Electronics PD-6130 manual Specifications PD-5030, Signals

Page 47

Specifications: PD-5030

Screen Size

43.5"(H)×24.5"(V) inches

 

 

1106(H)×622(V) mm

 

 

diagonal 50"

 

 

 

Aspect Ratio

16 : 9

Resolution

1365(H)×768(V) pixels

Pixel Pitch

0.032"(H)×0.032"(V) inches

 

 

0.81(H)×0.81(V) mm

 

 

 

Color Reproduction

256 levels, 16,770,000 colors

Signals

 

 

Synchronization Range

Horizontal : 15.5 to 110 kHz

 

 

(automatic : step scan)

 

 

Vertical : 50.0 to 120 Hz

 

 

(automatic : step scan)

 

 

 

 

Input Signals

RGB, NTSC (3.58/4.43), PAL (B,G,M,N),

 

 

PAL60, SECAM, HD*1 , DVD*1 , DTV*1

Input Terminals (VIDEO1 and RGB1 can also be used as OUTPUT terminals)

 

RGB

 

 

Visual 1 (Analog)

mini D-sub 15-pin×1

 

Visual 2 (Analog)

BNC (R, G, B, H/CS, V)×1*2

 

Visual 3 (Digital)

DVI-D 24-pin×1

 

 

 

 

Video

 

 

Visual 1

BNC×1

 

Visual 2

RCA-pin×1

 

Visual 3

S-Video: DIN 4-pin×1

 

DVD/HD/DTV

 

 

Visual 1

RCA-pin (Y, PB[CB], PR[CR])×1*1

 

Visual 2

BNC (Y, PB[CB], PR[CR])×1*1, *2

 

Audio

Stereo RCA×3 (Selectable)

 

RS-232C Control

D-sub 9-pin×1 (RS-232C)

Sound output

9W+9W at 6 ohm

Power Supply

AC120V 50/60Hz

Current Rating

6.4A (maximum)

Power Consumption

480W (typical)

Dimensions

48.1 (W)×30 (H)×3.9 (D) inches

 

 

1222 (W)×736 (H)×99(D) mm

 

 

Weight

100 lbs / 45.4 kg (without stand)

Environmental Considerations

 

 

Operating Temperature

0°C to 40°C / 32°F to 104°F

 

Humidity

20 to 80% (no condensation)

 

Altitude

0 to 9180 feet / 0 to 2800 m

 

Storage Temperature

-10°C to 50°C / 14°F to 122°F

 

Humidity

10 to 90% (no condensation)

 

Altitude

0 to 9840 feet / 0 to 3000 m

Front Panel User Controls

Power on/off, Input source select,

 

 

Volume up/down/ Menu control

Remote Control Functions

Power on/off, Input source select, Menu

 

 

control,Volume up/down, Adjust (Up,

 

 

Down, Left, Right), Pointer, Zoom up/

 

 

down, Sleep, Wireless/ Wired remote

 

 

control

OSM Functions Picture (Contrast/Brightness/Sharpness/ Color/Tint/ Picture mode/Noise reduction/Color temperature/ White balance/Gamma/Low tone/Color View), Audio (Bass/Treble/Balance/Audio input), Image Adjust (Aspect mode/V-Position /H-Position/V-Height /H- Width/Auto Picture/Fine picture/Picture adjustment), Option1 (Menu/BNC Input/RGB Select/HD Select/ Input Skip/All Reset), Option2 (Power management/ Film mode/Long life [Peak Bright, Orbiter, Inverse, White, Soft focus]/Gray level/S1/S2/Picture size/DVI Set up), Option3 (Timer Power on mode/Button lock/ IR Remote/Loop out, Color system, Source information

*English, German, French, Italian, Spanish, Swedish, Chinese

 

1.6"

2.3"

48.1" (1222)

(41)

 

 

(58)

43.5" (1106)

 

 

24.5" (622)

30" (736)

 

 

 

3.9"

 

 

(99)

 

Units are in inch

 

 

(mm)

The features and specifications may be subject to change without notice.

*1 HD/DVD/DTV input signals supported on this system

480P (60 Hz)

480I (60 Hz)

525P (60 Hz)

525I (60 Hz)

576P (50 Hz)

576I (50 Hz)

625P (50 Hz)

625I (50 Hz)

720P (60 Hz)

1035I (60 Hz)

1080I (50 Hz)

1080I (60 Hz)

*2 The 5-BNC connectors are used as RGB/PC2 and HD/DVD2 input. Select one of them under “BNC INPUT”.

Supported Signals

•640×480P @ 59.94/60Hz

•1280×720P @ 59.94/60Hz

•1920×1080I @ 59.94/60Hz

•720×480P @ 59.94/60Hz

•720×480I @ 59.94/60Hz

Note: In some cases a signal on the plasma monitor may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc...). If you do experience such a problem please contact Mitsubishi Digital Electronics and also the manufacturer of the source equipment.

Other Features Motion compensated 3D Scan Converter (NTSC, PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3 pull down Converter (NTSC, 480I, 525I, 1035I, 1080I (60Hz)), 2-2 pull down Converter (PAL, 576I, 625I, NTSC, 480I, 525I), Digital Zoom Function (100-900% Selectable), Anti Image Burn (Peak Bright Lock 1-3, Inverse, White, Orbiter (Auto1,2/Manual), Color Temperature select (high/medium/mid low/low, user has 4 memories), Button Lock (Except power SW), Auto Picture, Input Skip, ColorView, Low Tone (3 mode), Programmable Timer, Gamma Correction (4 mode), Loop through interface, Plug and play (DDC1, DDC2b, RGB3: DDC2b only)

Accessories Remote control with two AAA batteries, Power cord, Owner’s guide, Safety metal fitting parts, Ferrite cores, Bands, Cable clamps, RGB cable, Remote cable, Registration card

Regulations UL Approved (UL 60950 and UL65000/CSA C22.2 No.60950-00/ CAN/CSA-E60065-00) DOC Canada requirements

Meets FCC Class B requirements

38

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Owner’s Guide Page Important Safety Instructions PD-5030/PD-6130 Risk of Electric Shock Do not Open PrecautionsImportant Information To avoid damage and prolong operating life Page Important No Abrasives Cleaning SafeguardsPlasma Display Screen & Cabinet Introduction to the PD-5030/ PD-6130 Plasma Monitors Features you’ll enjoy includeContents of the Package IntroductionContents Ventilation requirements for enclosure mounting How to Attach Options to the Plasma MonitorFront View Part Names and FunctionEXT Speaker L and R Rear View/ Terminal BoardRGB/PC Remote Control5AUTO Position Battery Installation and ReplacementApprox 7m/23ft Using the wired remote control modeHandling the remote control Operating RangeHD-5000 InstallationMitsubishi HD Receiver/Controller Connecting Your DVD Player Connecting Your VCR or Laser Disc PlayerExternal DVI Device with DVI-HDCP MonitorLink Pin Configuration DVI ConnectorMonitorLink Connections MonitorLink and MonitorLink ControlClamp Video signal RGB/DVD/HD signalLoop Out Cable ManagementTo adjust the size or quality of the picture automatically To adjust the sound volumeTo cancel the sound To check the settingsTo check the remaining time To set the off timerTo cancel the off timer After the power is turned off with the off timerFormat Sizes When viewing videos or digital video discsExpand screen size Format Operation with Computer Signals Supported resolution Narrow screen size 43 or SxgaMenu Operations On-Screen Menu OSM ControlsAdjusting the picture Video Settings MenuReducing noise in the picture Setting the color temperatureAdjusting the color to the desired level  LOW Tone settings Making the Low Tone adjustments Adjusting the white balance  Gamma settingsColorView Audio Settings Menu Colorview settings  Audio settings menuExample Setting Audio INPUT1 to Video Monitor Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjSetting the on-screen menu Option1 Settings Menu BNC Input Settings Setting the BNC connectorsSetting a computer image to the correct RGB select screen Example Set the BNC Input mode to Comp RGB Select modes Setting high definition images to the suitable screen sizeSetting the Input Skip  Input Skip settingsSetting the power management for computer images Option2 Settings MenuResetting to the default values Reducing burn-in of the screen POWER/STANDBY indicatorSetting the picture to suit the movie Peak Bright settingsOrbiter Function settings Orbiter settingsExample Inverse SettingsSetting the time for INVERSE/WHITE Setting the timeSoft Focus Setting the screen size for S1/S2 video inputSoft Focus settings Gray Level settingsBlack Level settings Setting the signal and black level for DVI signalS1/S2 settings PLUG/PLAY settingsPresent Time Option3 Settings MenuUsing the timer  Present Time settings Special characters in the Program Timer screen Setting the power on mode Program Timer settings  To reset the program IR Remote settings Enabling/disabling remote control wireless transmission PWR. on Mode settings  Button Lock settings To connect another display Loop Out setting Loop OUT settings To set the Loop OUT to onSetting the video signal format Language Settings MenuColor System Settings Menu Setting the language for the menusCommunication Parameters RS-232C ControlApplication ConnectionsSymptom Checks Remedy TroubleshootingPage Signals Specifications PD-5030Specifications PD-6130 Computer input signals supported by this system Table of Signals SupportedSupported resolution Page Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity
Top Page Image Contents