JVC VR-510U manual Setting the date and time, Daylight-saving compensation

4 PREPARATION (contd.)

4-3 Setting the date and time

	Jog dial
[MENU] button		Shuttle dial
MENU	L
	SE ECT
REV		FWD
SEARCH
		EXECUTE
	SKIP/ALARM
	SEARCH
3.	JOG	Characters
		selected with
		the cursor are
		highlighted.

4.	[ C LO C K	S E T ]			J O G
	M	D	Y	H	M
					0 : 0	0
	1	1	2 0 0 1				Blinking
	D A Y L I G H T S A V I N G
						O F F

1.Turn the power ON.

Check the connections and press the [POWER] switch ON.

2.Display the main menu.

Press the [MENU] button to display the main menu screen.

Refer to “Jog/shuttle dial operation” on page 16 and set the jog dial function with the shuttle dial operation.

3.Display the [CLOCK SET] screen.

Set the cursor on [CLOCK SET] with [JOG f]. Turn the shuttle dial to display the [CLOCK SET] screen.

4.Set the month.

Set “month” with [JOG – +].

5.Set the day.

Set the blinking cursor on “D” with [JOG p[] and set the day with [JOG – +].

6.Set the year, hour and minute.

Repeat the procedure for step 5 for setting.

7.Enter.

When all settings are complete, press the [MENU] button twice to restore the normal screen.

Note:

5.	[ C LO C K	S E T ]
	M	D	Y
	1	1	2 0 0 1

●If the date is changed when there is recorded data on the hard disk, make sure the recording date and time do not overlap.

Otherwise, playback operation, skip search and direct search may not function correctly.

J O G

HM

0 : 0 0

Blinking

D A Y L I G H T S A V I N G O F F

4-4 Daylight-saving compensation

Use the <DAYLIGHT SAVING> menu switch on the CLOCK SET setting screen to turn the Daylight Saving mode ON or OFF.

When <DAYLIGHT SAVING> is “ON”, the set time is advanced one hour.

•When setting the time, make sure the <DAYLIGHT SAVING> switch is “OFF”.

When the unit is shipped, this switch is set to “OFF”.

•Clock setting is not possible during timer recording.

During daylight-saving time Standard time

1.Set the time one hour behind the actual time.

2.After setting the time, set the <DAYLIGHT SAVING> switch to “ON”.

•The time advances one hour.

3.At the end of the daylight-saving time season, set the <DAYLIGHT SAVING> switch to “OFF”.

•The standard time is displayed.

1.Set the clock to the actual time.

2.When the daylight-saving season starts, set the <DAY- LIGHT SAVING> menu switch to “ON”.

• The display time advances one hour.

13