JVC VR-510U manual Introduction, Major features, Precautions

Page 5

1 INTRODUCTION

Major features

Large-capacity hard disk (80 GB)

Large-capacity hard disk enables high-quality/high-capacity recording/playback. (Can be increased up to 160 GB)

Simultaneous recording/playback mode

You can play or back up programs even during recording.

Instant picture search

You can access images at a specified date/time or alarm point instantly.

Restoring recording after power failure

When power is restored after power failure, recording automatically re-starts in the same mode engaged before the power failure.

Timer recording function

Up to 8 timer recording settings can be programmed, including daily and weekly.

Alarm recording function

You can preset the VCR to automatically enter a specified recording mode whenever an alarm signal is received.

RS-232C control

JVC cannot accept liability for loss or damage to recording that result from a malfunction of this unit or the hard drive.

Please note that it may be unlawful to use any material recorded from television broadcast programs or pre- recorded programs without the consent of the owner of copyright, except in cases where the material is recorded exclusively for personal use.

When the hard disk is replaced or the firmware is up- graded, all recorded data on the hard disk is erased.

Characters and marks used in this text

Caution : Additional information about a specific operation or procedure.

Memo : Information about a function or specification.

Reference : Other items or pages containing information on the topic.

1-1 Precautions

Installation and storage

To avoid malfunctions or damage to your recorder, do not use or store it in places subject to the following conditions.

Extreme heat or cold – temperature outside the allowable range (5˚C to 40˚C)

High humidity – outside the allowable operating range (30% to 80%)

Strong magnetic fields (generated by transformers, motors, etc.)

Electrical waves generated by equipment such as a transceiver or cellular phone

Dust and soil

Vibrations

Condensation

Handling

To prevent unit from overheating, do not place it anything on top of any other equipment or place other equipment on top of it.

This unit should only be operated when it is in a horizontal (flat) position.

Avoid violent shocks to the unit.

Do not move this unit when the power is ON. This could cause it to malfunction.

To avoid a malfunction, do not place anything heavy such as a TV monitor on this unit.

To clean this unit, wipe it gently with a soft cloth.

Do not use chemical solvents such as thinner or benzene to clean this unit. Doing so could damage the surface. To

remove any excessive dirt, wipe the unit with a cloth dipped in detergent and then wipe it with a dry cloth.

Transportation

Do not apply a shock to this unit during transportation. Do not move this unit during recording or playback.

Energy saving

When the unit is not going to be used for a long time, turn the power off to avoid unnecessary power consumption.

Hard disk

The hard disk is a consumable item. Replacement is recommended after 30,000 hours of use (if used in a 25˚C environment). For information on maintenance planning and costs, consult your nearest JVC dealer.

5

Image 5
Contents Serial No For Customer UseVR-510U Page Information Safety PrecautionsContents Introduction Major featuresPrecautions Front panel CONTROLS, Connections and DisplayRear panel Display Connecting a camera Recording video signals from a cameraMenu switch setting ConnectionsConnection procedures Connecting more than one camera using an external switcherPower cable MonitorConnecting signal input/output terminals Preparation Installing a batteryPower supply During daylight-saving time Standard time Setting the date and timeDaylight-saving compensation On-screen display ON-SCREEN DISPLAY/MENU SwitchesMain menu screen Menu switchesMenu flow Jog/shuttle dial operation Menu switches contdShuttle dial operation Jog dial operationDisplay  Set REC Quality and REC Speed on the display panel SettingSetting item Menu switch Setting value Description Menu switch detailsSetting in is the factory setting Menu switch details contd Sensor Mode Alarm OFF Alarm REC Mode OFFSensor Alarm ALARM/SENSOR OFFRecording Major menu switchesBasic operation Recording systemWeekly timer Program timer recordingTimer-recording for 24 hours or more Program timer recording contdMove the cursor Daily timerChanging timer program settings Canceling a timer recording programOperation in the Timer Recording Standby mode Holiday timer recording Repeat recording during alarm recording Alarm recordingCancel button Jog dial Connect an alarm sensorExample Pre-sensor recordingAutomatic restart of recording after power failure Recording with an external activation signalConnection OperationPlayback Simultaneous Playback modeJog playback operation Jog/shuttle playbackShuttle playback operation Time search Skip searchAbout the time search Execute time searchAbout event/alarm search Alarm searchSkip search contd Event searchAlarm direct search Alarm or day/time direct search Clearing the alarm list Day/time direct search Scan the disk when the power is on Hard disk maintenanceHard Disk Control Scanning the diskErasing & formatting Hard disk maintenance contd Erasing & formatting Erase & format the diskError indication TroubleshootingOn-screen indication Cause Possible solution Indication lightsNo error indication Protocols and commands Specifications10 RS-232C Interface  Basic table JVC table Protocols and commands contd Operation commands CommandsCommands Description  PreparationBit Playback Camera Fixed Commands contd Setup commands Command Description  Sense commandsB9H BEH Recording time OthersTerminals Signal level Remarks Signal input/output terminalsClock Reset OUT Clock ResetVideo signal system Provided accessoriesDimensions Audio signal systemPage Page VR-510U Digital Video Recorder