JVC VR-510U manual Pre-sensor recording, Example

POWER

WARNING

SLEEP

(S) SENSOR ON indication

[ALARM/SENSOR MODE] screen

[MENU] button Shuttle search dial

DIGITAL VIDEO RECORDER VR-510U

[CANCEL] button

Jog dial

When an alarm signal is input to the rear panel [ALARM IN] terminal in the Stop mode, sensor recording starts in the mode set with the menu switch.

6 RECORDING (contd.)

6-5 Sensor recording

TIMER	CANCEL	MENU	SE	L
				ECT
			REV
	DISPLAY	SEARCH

REC STOP PLAY STILL

SKIP/ALARM

SEARCH

FWD	REC
	CLOCK RESET/ CLEAR
EXECUTE	OPE. LOCK
	ON

[REC] button

3.	[ E X T MOD E ]	JOG
1	. R E C M ODE	O F F
2 . H DD F U L L O U T		O F F
	[ A L A RM S ENS OR MOD E ]
1	. R E C M OD E	SENSOR
2 . R E C D UR AT I ON		1 8 0 S EC
3 . P R E S E N S OR R E C		OF F
4	. P R E S E N S OR
	R E C D URA T I ON	1 0 S EC

Set to “SENSOR”.

Caution:

●Do not use the Sleep mode in the Sensor Recording Standby mode. If the Sleep mode is engaged, there will be a delay between the time an alarm signal is received and sensor recording starts. No images will be recorded during this period.

Memo:

●Sensor recording speed <REC SPEED> is fixed at “30”. <AUDIO REC> is fixed to “ON”.

●<REC QUALITY> for sensor recording is set with <DVR MODE>.

1.Connect an alarm sensor.

Connect the alarm sensor to the rear panel [ALARM IN] terminal.

2.Turn the power ON.

Check the connections and set the [POWER] switch on the rear panel to ON.

3.Set the menu switches.

Set the required menu switches. For details, refer to “Setting” on page 18.

[ALARM/SENSOR MODE]

[REC MODE] : Set to “SENSOR”. (S) lights on the display panel for the [SENSOR] indication.

[REC DURATION] : Select how long you want sensor recording to continue after an alarm signal is received.

[PRESENSOR REC] : Set to “ON” to execute pre- sensor recording.

[PRESENSOR REC DURATION] : Set the time for pre-sensor recording.

[BUZZER]

[ALARM/SENSOR]: Set to “ON” to sound the buzzer during sensor recording.

Reference: “5-3 Menu switch details” on page 21.

4.Engage the Sensor Recording Standby mode. Engage the Stop mode. When an alarm signal is received, sensor recording starts (see step 3 above).

*To stop the buzzer during sensor recording, press the [CANCEL] button.

Pre-sensor recording

In the Pre-sensor Recording mode, recording starts from the point before an alarm signal is input during sensor recording.

<Example>

•When <SENSOR REC> and <PRESENSOR REC> are set to “ON” and <PRESENSOR REC DURATION> is set to “30” sec.

Memo:

●Even though <PRESENSOR REC> is set to “OFF”, pre-sensor recording may be performed for about 1 second.

	Alarm signal
Time
	<30 sec.>
Sensor Recording	Pre-sensor
	recording:	Sensor recording
Standby (Stop)
	Normally recording
mode	is performed with
	camera switching.

29