JVC VR-510U manual Rear panel

Page 7

2 CONTROLS, CONNECTIONS AND DISPLAY (contd.)

2-2 Rear panel

26

CAMERA IN

1

12

MONITOR OUT

27

 

 

 

28

 

 

AUDIO

 

 

RS-232C

 

 

IN

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

CAM SW ALARM

SPARE

ALARM

CLOCK EXT

OUT

IN1

RESET RESET IN REC IN

2

SPARE

 

 

CLOCK

HDD

COM

SPARE COM RESET OUT

FULL OUT

AUDIO

 

 

 

 

 

 

OUT

 

 

 

 

 

 

21

POWER

ON I O OFF

SIGNAL GND

AC IN 120 V

50 Hz / 60 Hz

25

24

23

22

&[STOP] button

Press this button to stop operation. In the Simultaneous Playback mode, press this button to stop playback and engage

*the normal recording mode.

[REC] button

Press in the Stop mode to start recording. The recording mode can be set with the menu switch.

(Reference: “6-1 Basic operation” on page 22.

[SLEEP] button

Before turning the power OFF, press this button to stop the )rotation of the hard disk.

[SYSTEM RESET] button

This button is used for servicing. Normally, you do not need to

quse this button.

[POWER] switch Turns power ON/OFF.

*Before turning the power OFF, press the ([SLEEP] button to wstop the rotation of the hard disk.

[AC IN] socket

eConnect to an AC 120 V outlet using the provided power cable.

Signal input/output terminal

CAM SW OUT

Outputs camera switch timing control signals when this unit is connected to a frame switcher.

Reference: "3-2 Connecting more than one camera (using an external switcher)" on page 10.

ALARM IN 1

Accepts signals to start alarm or sensor recording.

ALARM RESET

Accepts signals to stop recording during alarm or sensor recording.

CLOCK RESET IN

Connect to a master clock or the [CLOCK RESET OUT] terminal of another device. When a clock reset signal is input, this unit can be set to the master clock or the other device’s clock.

When the clock reset signal is input, the clock second value is reset: .

With 29 seconds or less, the minute value stays the same and the second value is reset to 00.

With 30 seconds or more, the minute value is increased by 1 and the second value is reset to 00.

CLOCK RESET OUT

Outputs a clock reset signal when the internal clock is 00:00 or 12:00.

EXT REC IN

Recording is automatically activated by an external signal when menu switch <REC MODE> of <EXT MODE> is set to “TRIG” or “MANUAL”.

Reference: “5-3 Menu switch details” on page 20.

HDD FULL OUT

Outputs a signal during recording when the hard disk’s available space is 0% except in the following cases.

Menu switch <HDD FULL OUT> set to “OFF”

Menu switch <REPEAT REC> set to “ALL”

Reference: “5-3 Menu switch details” on page 20.

r[AUDIO OUT] audio output connector Outputs recorded audio during playback.

In the Record or Stop mode, outputs the input audio signal. Audio is not output in the following cases.

When playing back signals recorded with menu switch <REC SPEED> set to “1/5” or “1/10”

In the Frame-by-Frame Playback, Still or Search mode

When playing back signals recorded with menu switch <AUDIO REC> set to “OFF”

tWhen the menu is displayed

[MONITOR OUT] monitor output connector

Outputs video signals recorded on the hard disk in the Play mode. In the Record mode, outputs video input signals from the camera or frame switcher connected to the [CAMERA IN] connector.

The picture signal from the [CAMERA IN] connector is output through the [MONITOR OUT] connector even when the power is

yturned OFF.

[CAMERA IN] camera input connector uConnect to a camera.

[AUDIO IN] audio input connector

Connect to the audio output connector of the audio source

idevice.

[RS-232C] remote connector

Connect a personal computer or compatible control unit for external remote operation.

Reference: “10. RS-232C INTERFACE” on page 40.

7

Image 7
Contents VR-510U For Customer UseSerial No Page Information Safety PrecautionsContents Precautions Major featuresIntroduction Front panel CONTROLS, Connections and DisplayRear panel Display Connections Recording video signals from a cameraConnecting a camera Menu switch settingMonitor Connecting more than one camera using an external switcherConnection procedures Power cableConnecting signal input/output terminals Power supply Installing a batteryPreparation Daylight-saving compensation Setting the date and timeDuring daylight-saving time Standard time On-screen display ON-SCREEN DISPLAY/MENU SwitchesMenu flow Menu switchesMain menu screen Jog dial operation Menu switches contdJog/shuttle dial operation Shuttle dial operationDisplay  Set REC Quality and REC Speed on the display panel SettingSetting in is the factory setting Menu switch detailsSetting item Menu switch Setting value Description Menu switch details contd ALARM/SENSOR OFF Alarm REC Mode OFFSensor Mode Alarm OFF Sensor AlarmRecording system Major menu switchesRecording Basic operationWeekly timer Program timer recordingTimer-recording for 24 hours or more Program timer recording contdMove the cursor Daily timerOperation in the Timer Recording Standby mode Canceling a timer recording programChanging timer program settings Holiday timer recording Connect an alarm sensor Alarm recordingRepeat recording during alarm recording Cancel button Jog dialExample Pre-sensor recordingOperation Recording with an external activation signalAutomatic restart of recording after power failure ConnectionPlayback Simultaneous Playback modeShuttle playback operation Jog/shuttle playbackJog playback operation Execute time search Skip searchTime search About the time searchEvent search Alarm searchAbout event/alarm search Skip search contdDay/time direct search Alarm or day/time direct searchAlarm direct search  Clearing the alarm listScanning the disk Hard disk maintenance Scan the disk when the power is on Hard Disk ControlErase & format the disk Hard disk maintenance contdErasing & formatting  Erasing & formattingIndication lights TroubleshootingError indication On-screen indication Cause Possible solutionNo error indication  Basic table SpecificationsProtocols and commands 10 RS-232C Interface JVC table Protocols and commands contd Preparation Commands Operation commands Commands Description Setup commands Commands contdBit Playback Camera Fixed Command Description  Sense commandsB9H BEH Recording time OthersClock Reset Signal input/output terminalsTerminals Signal level Remarks Clock Reset OUTAudio signal system Provided accessoriesVideo signal system DimensionsPage Page VR-510U Digital Video Recorder