JVC VR-510U Alarm REC Mode OFF, Sensor Mode Alarm OFF, Sensor Alarm, REC Duration, Manual, Disk

5 ON-SCREEN DISPLAY/MENU SWITCHES (contd.)

5-3 Menu switch details (contd.)

Setting item	Menu switch	Setting value			Description
ALARM/	REC MODE	[OFF]	Sets the alarm or sensor recording.
SENSOR MODE		ALARM	OFF		: Does not execute alarm/sensor recording.
		SENSOR	ALARM		: Executes alarm recording.
			SENSOR : Executes sensor recording.
			Reference: “6-4 Alarm recording” on page 28 and “6-5 Sensor
					recording” on page 29.
	REC DURATION	10 SEC	Selects the recording duration when an alarm or sensor signal
		15 SEC	is input.
		30 SEC	10 SEC		: Executes alarm/sensor recording for 10 sec.
		60 SEC	15 SEC		: Executes alarm/sensor recording for 15 sec.
		120 SEC	30 SEC		: Executes alarm/sensor recording for 30 sec.
		[180 SEC]	60 SEC		: Executes alarm/sensor recording for 60 sec.
		MANUAL	120 SEC : Executes alarm/sensor recording for 120 sec.
			180 SEC : Executes alarm/sensor recording for 180 sec.
			MANUAL: Executes alarm recording for as long as an alarm
					signal is input.
			*Recording continues about 5 seconds after the set duration
			has passed.
			(<AL/SENS DET MARK> is also shown.)
	PRESENSOR REC	[OFF]	Sets whether or not pre-sensor recording is executed.
		ON	To execute pre-sensor recording, set this switch to “ON”.
			Reference: “Pre-sensor recording” on page 29.
	PRESENSOR REC	[10 SEC]	Selects the recording duration when menu switch
	DURATION	30 SEC	<PRESENSOR REC> is set to “ON”.
		60 SEC	Reference: “Pre-sensor recording” on page 29.
BUZZER	HDD END	[OFF]	Sets whether or not the buzzer sounds when the hard disk is
		ON	full (during recording).
			OFF: The HDD end buzzer does not sound.
			ON : The buzzer sounds.
	ALARM/SENSOR	[OFF]	Sets whether or not the buzzer sounds during alarm/sensor
		ON	recording.
			OFF: The buzzer does not sound.
			ON : The buzzer sounds.
	WARNING	[OFF]	Sets whether or not the buzzer sounds when a warning occurs.
		ON	OFF: The buzzer does not sound.
			ON : The buzzer sounds.
UTILITY	AUTO SCANDISK	[OFF]	Sets whether or not the disk is scanned when the power is
		ON	turned ON.
			OFF: Disk is not scanned.
			*The disk is not scanned unless the Record mode is engaged
			before the power is turned OFF.
			ON : Scans the disk when the power is turned ON.
			Reference: “8-1 Hard disk maintenance” on page 36.
	MANUAL SCAN	[OFF]	When this switch is set to “ON” and the [SKIP
	DISK	ON	SEARCH·EXECUTE] button is pressed, the disk is scanned.
			Reference: “8-1 Hard disk maintenance” on page 36.
	QUICK ERASE	[OFF]	Selects whether the hard disk is formatted with standard or
		STD	extended mode.
		EXTN	When the disk is formatted, all existing data on the hard disk
			will be erased.
			OFF	: Does not format.
			STD	: Normally, use this position. Up to 13,000 alarm/
					sensor events can be recorded.
			EXTN	: Set to this position if you want to be able to record
					more than 13,000 alarm/sensor events (up to about
					100,000 events).
			* Extended formatting takes about 5 minutes to complete.
			Recording time is shorter than with the standard format.
			Reference: “8-1 Hard disk maintenance” on page 37.

21