JVC VR-510U manual Menu switch details, Setting in is the factory setting

5 ON-SCREEN DISPLAY/MENU SWITCHES (contd.)

5-3 Menu switch details

The setting in [ ] is the factory setting.

Setting item	Menu switch	Setting value		Description
ON SCREEN	ON SCREEN	[UP-L]	Sets the on-screen display position.
MODE	POSITION	UP-R
		LOW-L
		LOW-R
	DAY	[ON]	Sets the on-screen day/month/year display.
		OFF	ON : Displayed.
			OFF: Not displayed.
	TIME	[ON]	Sets on-screen clock display
		OFF	ON : Displayed.
			OFF: Not displayed.
	ALARM COUNT	[ON]	Sets the on-screen alarm/sensor number display.
		OFF	ON : Displayed.
			OFF: Not displayed.
	REC REMAIN	[ON]	Sets the on-screen remaining hard disk capacity display.
		OFF	ON : Displays the remaining capacity (does not display it
				when the repeat recording is set to “ON”).
			OFF: Does not display the remaining capacity.
	AL/SENS DET	[ON]	Sets whether or not the “AL” mark is displayed on screen
	MARK	OFF	during alarm/sensor recording.
			ON : Displayed.
			OFF: Not displayed.
	WARNING	[ON]	Sets whether or not warnings are displayed on screen when
		OFF	an abnormality occurs.
			ON : Displayed.
			OFF: Not displayed.
FRONT DISPLAY	REC TALLY	[ON]	Sets whether or not the recording indicator on the front panel
		OFF	lights during recording.
			ON : Indicator lights.
			OFF: Indicator does not light.
	ALARM/SENSOR	[ON1]	Sets whether or not the recording indicator blinks when
	INDICATION	ON2	an alarm/sensor signal is input.
		OFF	ON1 : Indicator blinks during alarm/sensor recording.
			ON2 : Indicator blinks when alarm/sensor recording is com
				pleted (this mode can be released with the [CANCEL]
				button).
			* ON1 and ON2 are effective only when menu switch <REC
			TALLY> is set to “ON”.
			OFF: The indicator lights during alarm/sensor recording.
DVR MODE	REC QUALITY	HIGH	Sets the recording picture quality.
		[NORM]	HIGH	: High-quality recording.
		BASIC	NORM : Normal-quality recording.
		LOW	BASIC : Middle-quality recording.
			LOW	: Low-quality recording.
			Reference: “11-1 Recording time” on page 47.
	REC SPEED	[30]	Sets the number of frames to be recorded. The displayed
		15	value shows the number of frames recorded in one second.
		10	<REC TIME> shows the available recording time on the hard
		5	disk. The amount of recording time available depends on the
		3	settings of <REC SPEED> and <REC QUALITY>, as well on
		2	the amount of free space remaining on the disk.
		1	Reference: “11-1 Recording time” on page 47.
		1/2
		1/5
		1/10

19