JVC VR-510U manual Troubleshooting, Error indication, On-screen indication Cause Possible solution

9 TROUBLESHOOTING

9-1 Error indication

Error indications are displayed on-screen whenever there is an abnormality with signal reception, the hard disk, or the menu settings (such as timer recording setting errors).

On-screen indication/	Cause	Possible solution	Page
[WARNING] indication			reference
“HDD ERROR”	The hard disk is not functioning properly.	Consult your nearest JVC dealer.	–
The [WARNING]
indication lights.
“HDD FULL”	There is no space on the hard disk for	Format the disk to clear all data and	37
The [WARNING]	recording. Even if the required recording	optimize available disk space. Or, set
indication lights.	time is short, the number of allowable	<REPEAT REC> to “AL•STOP”,
	recordable events may have been	“AL•LOCK” or “ALL”.
	exceeded (13,000 for standard format or	* When the disk is formatted, the re-
	about 100,000 for extended format).	corded data is erased.
“LOW BATTERY”	The backup battery is not installed or	Replace the battery with a new one.	12
The [WARNING]	need to be replaced.
indication lights.
“FAN MOTOR ERROR”	The fan motor is not functioning properly.	Consult your nearest JVC dealer.	–
The [WARNING]
indication lights.
“INPUT SIG ERROR”	No video signal is input.	● Engage the Stop mode and check the	9
The [WARNING]		connections.
indication lights.		* When “Camera abnormal” is displayed
		and recording continues, recording may
		not be performed normally. First,
		remove the cause of the abnormality.
“PLEASE SET TIMER	No events are programmed for timer	Check the timer program.	23
PROGRAM”	recording.

38