LG Electronics LDV-S504, LDV-S503 owner manual Replacing the Hard Disk Drive, Power cable for

Page 18

Power cable for

8.Attach the hard disk mounting brackets with the screws.

9.Connect the power cable.

Extension		Power cable for
HDD power cable.		power supply.

10.Connect the IDE cable to the IDE connector on the main board. You must connect the IDE cable as shown below.

Primary IDE cable

Secondary IDE cable

IDE1 (Primary

HDD connector)

IDE2 (Secondary

HDD connector)

Replacing the Hard Disk Drive

Turn the power of the unit off and detach the power plug from the outlet.

1.Follow steps 1-3 described in “Installing the Hard Disk Drive”.

2.Remove the screws and detach the hard disk mounting brackets from the unit.

3. Remove the connector from the HDD.

11.Assemble the front panel and top case.

12.Fix the screws.

13.After installing the HDD, you must format the HDD using the setup menu (See page 35).

Notes:

•When you add the new HDD, do not change the position or jump setting of the HDD.

It may delete the current data and cause a mal- function.

•You must connect the primary IDE cable to the primary IDE connector on the main board and the secondary IDE cable to the secondary IDE connec- tor on the main board.

4.Remove the screws from the hard disk drive on the left/right side of the hard disk the mounting bracket.

18

Image 18

Contents DIGITAL VIDEO RECORDER OWNER’S MANUALLDV-S504W/WIDEENGV1.2MFL30580171 MODEL LDV-S504 LDV-S503REGULATORY INFORMATION FCC Part DO NOT REMOVE COVER OR BACK NO USER-SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL Disposal of your old applianceADDITIONAL PROGRAMIMPORTANT SAFETY INSTRUCTIONS Safety warnings and Cautions Please beware of the following precautions before installing the DVR SEARCH AND PLAYBACK HOOKUP AND SETTINGSINTRODUCTION RECORDINGFeatures INTRODUCTIONINTRODUCTION Front Panel d e f g hx LDV-S503 Accessories b c d Rear Panelx LDV-S504 e f g h i j k l m n oRemote Control Be sure to switch off the camera before installation and connection HOOKUP AND SETTINGSPrecautions Basic Connection OverviewHOOKUP AND SETTINGS Connecting the RS-422/485 DeviceConnecting Sensor Input and Alarm Output RS-422/485 TerminalConnecting CONSOLE Connecting the USB DeviceConnecting the RS-232C Port Alarm OutputInstalling or Replacing the Hard Disk Drive Installing the Hard Disk DriveConcerning the Internal Hard Disk Drive mounting bracket HOOKUP AND SETTINGS Replacing the Hard Disk Drive Power cable forThe following HDD has been ensured. When you attach multiBefore Operating the System tested and compatibility isSystem Operation System Shutdownf System Control Bar General Explanation of the Live Screen on the Main MonitorMain Monitor Screen a Channel NumberSelecting Live Screen Mode Main MonitorSpot Monitor Changing to a Picture in a Preset Position Preset SettingsTo Register Preset Positions PTZ Camera ControlSetup for PTZ Cameras To Clear the Preset PositionTo Tour The Preset Positions Viewing System InformationMenu Configuration Using a Mouse to Set a MenuCamera Settings CameraVideo Adj Recording VideoSchedule Settings To Set a Recording Schedule for a Special DayTo Set the Recording Schedule for a Typical Day of the Week Copying from the Scheduled Data of the Channel Checking the Special Day Schedule ListCopying the Recording Schedule Copying from the Scheduled Data of the DayDisplay Settings z Channel Namez Recording Mode Event Settings SensorMotion DDNS Dynamic Domain Name System Network SettingsTCP/IP NotificationMail EmergencyBuzzer System SettingsDate/Time UserHard Disk UpdateConfiguration z OverwriteBackup Instant BackupLog Out Daily/Weekly backup System IDRECORDING Instant RecordingInstant Playback in PIP Picture in Picture SEARCH AND PLAYBACKPLAYBACK Instant Playback in POP Picture over PictureSEARCH Select Source DeviceDate and Time Search Event Search Smart SearchSEARCH AND PLAYBACK Bookmark Search Function Functions Available During Search PlaybackButton mm , mmbEXPORT PC Requirements Client Program InstallationCLIENT PROGRAM Recommended PC RequirementsConnecting to the DVR Register the Site NameUser Log-In 2. Mode Selection Icons Main Screen of DVR Client Program1. Program Menu 3. Screen Mode Selection IconsUsing the Camera View Using the live windowLive Mode Changing to a Picture in a Preset Position Using the Pan/Tilt/Zoom FunctionTo Register Preset Positions a b c d e f g h j kTo Tour the Preset Positions Using the Log View FunctionTo Clear the Preset Position Setup for PTZ cameraUsing the Date/Time Search function Using the Event Search functionSearch Mode Cancel the selected area Select the all area Using the Bookmark Search FunctionUsing the Smart Search function Selected area within red boxRemote Setup Mode Camera / Display SetupCamera Setting Schedule setup Recording Frame Rate SettingsDisplay Settings Event setup Schedule Copy SettingsSpecial Day Settings Mail Settings Network setupTCP/IP Settings NotificationUpdate Settings System setupDate/Time settings AdministratorMain Screen of Emergency Agent Additional ProgramsEmergency Agent Program a b cMain Screen of Export Viewer Port SettingExport Viewer Program Message SearchControl Icons Watermark SettingPlaying Data Video InformationTroubleshooting REFERENCEREFERENCE Audio data recorded Some of the front panel LEDs do not light If you observe any of the following symptomsYou can reboot the DVR as follows The DVR does not operate normallySupported CD/DVD writing device list Recommended DevicesSupported USB Memory list Supported CD/DVD Media listClassification Factory Default Configuration SettingsDefault Setting Detailed Items1st level 2nd level3rd level Classification Quality Recording Time Table 250GB HDDResolution VideoNTSC/PALThis recording time table is for reference only LDV-S503 SpecificationsModel LDV-S504P/NO MFL30580171 0701