LG Electronics LDV-S503, LDV-S504 owner manual Recording, Video, Hookup And Settings

Recording

Settings concerning normal recording and event recording.

zCh: Displays the channel number.

zRes.: Selects the recording resolution.

zQuality: Selects the recording picture quality (LOWEST, LOW, NORMAL, HIGH or BEST).

zFrame Rate: Selects the frame rate. The frame rate is the number of recorded frames per second. According to resolution, the frame rate is set automatically. If you wish to set manually, refer to the below.

Resolution		Frame Rate
	352*240	1, 3, 5, 7.5, 15, 20, 30
NTSC	704*240	1, 3, 5, 7.5, 15
	704*480	1, 3, 5, 7.5
	352*288	1, 3, 5, 6, 12.5, 20, 25
PAL	704*288	1, 3, 5, 6, 12.5
	704*576	1, 3, 5, 6

zPre.: Specify the pre-event recording time that records the situation until the sensor alarm signal has input or motion has been detected. (OFF, 5, 10, 20, 30, 40, 50 or 60 SEC)

zPost: Specify the post-event recording time that records the situation from when the sensor alarm signal has input or motion has been detected. (10, 20, 30, 40, 50 SEC or 1, 2, 3, 5, 10 MINUTE)

Video

Selects the video format to NTSC or PAL according to your video system format.

1.Select the video format.

The confirmation message is displayed.

2.Select [OK] and press ENTER.

After the HDD has been formatted, the system will reboot.

HOOKUP AND SETTINGS

27