LG Electronics LDV-S504, LDV-S503 owner manual System Settings, Date/Time, Buzzer, User

System Settings

Date/Time

zNTP: Set to ON when using the NTP (Network Time Protocol) server for time adjustment. If the NTP is set to OFF, the time settings should be entered manually and the [Time Server], [Private Time Server], [Sync. Interval] and [NTP Test] options are deactivated.

zDate: Enter the current date.

zTime: Enter the current time.

zDate Format: Select the date display format.

zDaylight Saving: Set to ON to you use the daylight saving function.

zTime Zone: Select your Time Zone.

zTime Server: For most cases select public. The DVR will obtain the average time among 5 public servers (rime.nist.gov, time-a.nist.gov, time- b.nist.gov, ntp.nasa.gov, clock.isc.org).

zPrivate Time Server: Enter the private time serv- er's IP address or host name using the virtual key- board.

zSync. Interval: You can set synchronized intervals with the NTP time server to 1 day, 1 hour, 1 month and 1 week.

zNTP Test: Select [NTP Test] to test the NTP server.

Buzzer

zButton Beep

-ON: Makes a sound when using the buttons.

-OFF: Turns off the button beep.

zSensor Buzzer

-ON: Makes a sound when a sensor occurs.

-OFF: Turns off the sensor buzzer.

zMotion Buzzer

-ON: Makes a sound when a motion is detected.

-OFF: Turns off the motion buzzer.

Note:

The buzzer is a low sound on this unit. If you want to make a loud sound, connect an external alarming device to the ALARM-OUT terminals (ex. Siren).

User

zAdministrator: Enter the new password for the administrator using the virtual keyboard.

zPower User: Enter the new password for the power user using the virtual keyboard.

zNormal User: Enter the new password for the normal user using the virtual keyboard.

Note:

Remember the new password. If you forget the new password please contact an authorized service center or the store where you purchased the system.

34